S1875-1 Rear output seal for CV Yoke 2.750 OD with 1.875 ID for 1973-1979 NP 203
|
|
Your Cost
$14.95
STATUS:
IN STOCK
|
|
S1875-1
Rear output seal
1973-1979 NP203 Transfer case
Use to install 1310 or 1330 CV Yoke.
UPC:
Part Number: S1875-1
|
S1875-1 Rear output seal for CV Yoke 2.750 OD with 1.875 ID for 1973-1979 NP 203
|
FOR FASTER SERVICE, PLEASE ORDER ALL PARTS ONLINE
STATUS: IN STOCK
YOUR COST:
$14.95
"Top quality Factory Fresh, Factory Boxed Genuine TIMKEN Parts at Denny's Driveshafts"
|
S1875-1
Rear output seal
Use this Seal when installing a 1310 or a 1330 series CV Yoke onto the rear output of a 1973-1979 NP203 Transfer case.
- To be sure this is the correct seal please check the following info before purchasing.
- Be sure your rear output tailshaft housing on your NP203 transfer case was designed for a seal diameter of 2.750 (2 3/4 inches)
- If 2.750 is correct then this seal will work to install any 1310 or 1330 CV yoke with a seal hub diameter of 1.875 (1 7/8 inches)
|
S1875-1 Rear output seal for CV Yoke 2.750 OD with 1.875 ID for 1973-1979 NP 203
|
|