DennysDriveshaft.com
Free Shipping on Orders Over $99.00

Product Search
Denny's Driveshaft builds custom steel and aluminum driveshafts for your high performance car, street rod, race car, van, pick up or 4x4 truck
 

You've come to the right place for a driveshaft

Denny's Driveshafts - Customer Testimonials


Write your testimonial for Denny's Driveshafts, and we'll share it with other website visitors.


I ordered my Slip Yoke for my 81 TA and it fit prefectly, it was worth every penny, now I can get it back on the road real soon. Thank You Denny's

Carmine A, East Haven, CT, Nov 30th, 2018

I just wanted to say thank you to Denneys driveshaft for helping me with my 1984 Ramcharger. I had many questions concerning the discontinued version front disconnect Dana 44. The customer service here is second to none. I had an answer every one of my questions in less than 24 hours more like 12 to 15 hours. The professionalism and expert advice on newer versions of old parts and even suggestions on how to remedy a discontinued and no longer available drivers side axle to the extent that they went on line found someone else who had a good used axle and sent me the link. Rest assured I will be sending everyone I find with drive train needs the Dennys
Thank you Denneys you have made a lifelong customer out of me.
Ron R

Ron R, Lexington Park, MD, Nov 6th, 2018

I need a pinion seal for a Dana 80 dually axle for my '05 F-350. Only place I could find it locally (Louisville, KY), biggest town in the state no less, was the way over priced local Ford dealer.
Did an internet search for the seal...a few places came up, but Denny's was the most reasonably priced..and promised quick delivery.
Well, I am very happy to report that what you advertise is exactly what you do!
Received my seals in 2 business days! More quickly than anything I was locally promised! AND at a FRACTION of the price of the other guys!
Thanks DENNYS! One very satisfied customer here!
Richard Dugan

Richard D, LOUISVILLE, KY, Nov 1st, 2018

I recently ordered a slip yoke and u-joints for my GMC
2500HD pick-up at 2:45pm. They were packaged and shipped by
3:00pm that day and I they were delivered in just a couple
of business days. Great customer service! Thanks.

Kevin K, Culloden, GA, Sep 18th, 2018

We ordered a left front axle for a Dodge truck. When we tried to put it on the truck we realized it was the incorrect axle. My husband worked very closely with Denny and they were able to identify what parts were needed. We were able to return the part at no cost to us and received the new parts within 2 days. I am very impressed with this company and will continue to order from them. I highly recommend this company to anyone. Denny and his team are extremely nice and very helpful. Thank you for working together with us. It is greatly appreciated and we were able to get my son's truck back on the road.

Yvette B, Spring Branch, TX, Sep 18th, 2018

Just to let you know received my yoke fits perfect
everything was great thank you will keep you all in mind for
any future projects and shipping was fast and prompt
outstanding.
Thanks Vinn

VINCENT M, Aug 22nd, 2018

I purchased a driveshaft from Denny's, and WOW! I was hoping the driveshaft would show up before my trip to IA, but it unfortunately didn't. So I drove to IA with a bent, loose, and WAY out of balance shaft! As soon as I got home, I immediately installed the new driveshaft! The first drive was better than new! I didn't realize how bad the shaft was! The ride after the install was very smooth! I was having a big problem with a vibration that I just couldn't solve! All of my driveability issues were solved with the new shaft! I was a little cautious during the ordering process, just due to the price of it! I was very afraid of it being either too long or too short, and have to live with the vibrations even longer! Would I do it again....YES! Was the price worth it....ABSOLUTELY! The new shaft is literally night and day difference! Cost, quality, and durability is what I was looking for! I'm sure I could've gotten a cheaper shaft, but I don't think it could've beaten Denny's! I'll be ordering another driveshaft for another project vehicle, Guaranteed! Considering the cost of it, you DO get what you pay for! Thanks Denny's!

Jeffrey S, Boyceville, WI, Jul 13th, 2018

Received my drive shaft today took a little longer than was expected but was totally worth the wait. Not only does it look great it fit even better quality product for sure!!

Charles D, Franklinville, NJ, Jun 19th, 2018

What a pleasure to have a supplier who is knowledgeable and helpful! Daniel did a fantastic job of guiding me to the correct parts and making recommendations for proper use. Parts arrived very quickly. When I called with a followup question, Denny himself helped me with the issue. Can't say enough good things about these folks.

Raymond G, Fredericksburg, VA, May 5th, 2018

Hello Denny's. I received my new driveshaft today and it is very nicely made, and it fit perfectly! Thank you for a great product

JOHN L, DURHAM, CT, Apr 27th, 2018

I called Denny earlier today with a technical question about a driveshaft I had done locally. My question pertained to 2 different dimensions about the transmission yoke engagement and amount that remained outside the transmission to the center of the transmission yoke u-joint. I did an engine swap that moved the engine forward requiring the driveshaft to be longer and a new longer yoke was put on my existing shaft and rebalanced. He reassured me that my dimensions were good. He could easily have sold me a new shaft which I was prepared for. Quite the testament to an honest businessman. A great big THANK YOU!! to Denny I would recommend Denny's Driveshaft to anyone.

Craig K, Huntington, NY, Apr 25th, 2018

Installed your driveshaft in my 48 Chevrolet and couldn't be happier. Glad I chose you people to do the work. Great job and you got it finished and out to me a lot sooner then expected. Thanks,Jim Whitehill Palm Coast,Florida

Jim W, Palm Coast, FL, Apr 20th, 2018

I can't say enough about this company. The customer service was great and I received the driveshaft on time. The driveshaft fit perfectly the first time and the quality of the drive shaft is amazing. I would highly recommend this company to anyone looking for a performance driveshaft.

james h, la luz, NM, Mar 16th, 2018

I looked all over for a part for dodge and ordered it from here but had actually ordered the wrong part. They went out of their way to call me and double check that is what I needed. Lucky for me they were able to find the correct part and got it ordered for me. The customer service was fantastic and I recommend them to everyone.

Steve R, Argenta, IL, Mar 13th, 2018

It's a pleasure to deal with top notch sales people as well as the owner of the company! When I called to place the order it was not a sales call but more of hot rodders helping hot rodders! Driveshaft came in two weeks earlier than expected and it fit perfect!!!
Thank You!

Dave H, West Poland, ME, Mar 10th, 2018

Received my driveshaft yesterday. A work of beauty!
Thanks for the help in figuring out what I needed and the
excellent workmanship. It fit and the clamp kit was just
what I needed. VERY pleased to do business with you.
Thanks
Rick

RICHARD B, LURAY, VA, Jan 3rd, 2018

Received my new drive shaft.Very fast service.Everything is perfect.Thanks for doing such a great job.You guy's are the best.Jim

Jim W, Palm Coast, FL, Dec 18th, 2017

Had to repair a custom Dana 60 in an industrial application, Denny's Driveshaft had all the parts I needed at reasonable pricing and they arrived FAST!! Great communication letting me know parts were on the way and everything arrived on time. Great company to deal with, nice to know customer service is still "out there"!!

Dante V, Manchester CT, CT, Dec 14th, 2017

ordered my part on a friday ups showed up next day right part great price

al d, rock hill, NY, Dec 9th, 2017

Excellent product! High quality, everything they said it was and more! Perfect fit on my car. Can't say enough good things about Denny's driveshaft! Thanks Again. Martin Wilson

Martin W, Alpena, MI, Dec 1st, 2017

Just recieved my driveshaft today, fits perfectly and looks great, thanks for an awesome job. Will be sure to recommend Dennys!

David S, Laurel, MD, Nov 17th, 2017

Had a couple discussions about my drive shaft problems, and they had no suggestions for parts to sell me!
I was punishing my drive line by trying to yank some tree stumps, and it broke. They discussed simply repairing my existing set up and driving away, promising to never try to jerk stumps again.
Rare to find any business that doesn't try to sell you SOMETHING, just for taking up their time.
I highly recommend Denny's Driveshaft for your driveline problems.
Thanks for saving my retirement pension for more pleasurable pursuits.

Dave B, Miami, FL, Oct 31st, 2017

I've purchased specialized driveline parts from Denny on multiple occasions for custom work and restorations. From the first time that I searched the website, the attention to detail, organization, and clear informative data on all parts, options, specs, etc truly impresses me. As a Marine, these are the life blood of what I do, same goes for truck projects. Anyone who has rebuilt a 30 year old axle or drive shaft knows the random variables involved...what's not quite metric and not quite standard...Denny has the answer for you. He has spoken with me on the phone multiple times, taken time out of his day to chew the fat on the finer aspects of U joints, ball joints, specs, Spicer parts that literally cannot be found anywhere else (he won't even give me his part's source, but that's fine I'd still keep my business here simply due to the quality of customer service). The young lady who handles the office work is also just as informative and extremely helpful. Every part I purchase arrives in a timely manner, securely packed, items that require instructions are clearly laid out, much of this info is freely posted by Denny on the website which is what keeps me coming back. The intricacies of these types of parts and how they fit, what years or options they fit, what works on what type of setup...you can't find anywhere else and that truly is a blessing. I've referred many off road buddies to Denny and will continue to do so. Keep doing what y'all are doing, you guys have a solid business model and a superior product all around. Semper Fi!

Angelo S, Norfolk, VA, Oct 23rd, 2017

It was about 8 months after I received their driveline before I actually installed it, but I remember how specific they were about all my measurements be fore ordering it, and when I finally removed my driveline it looked to be a little loner than mine and I got worried it wasn't going to fit, but I went ahead and install the yoke and then the driveline and it fit perfectly and car runs really smooth, it's a 71 Camaro 383 sbc with a turbo 400 trans, my car runs 12.50 at Firebird in Boise ID. I am very impressed and would highly recommend them in the future.

Robert W, Baker City, OR, Oct 4th, 2017

For no reason other than meeting them at a swap meet I tried another major driveshaft company for a custom driveshaft for my 66 Mustang Pro Street. They would not return my calls, only returned email once but never responded after I sent follow-ups. Tried my best to spend money there. Left me feeling no one wanted my business or my order wasn't important. Then I saw on one of the Mustang Forums people giving rave reviews for Denny's Driveshaft. Sent an email and got an instant response and phone calls. I felt they really wanted to help and gave me excellent advice. I ordered and the driveshaft arrived when they said it would and packaged safely. The quality of craftsmanship is second to none. The service and communication one of the best I have ever encountered. Will ALWAYS go to this company in the future for any driveshaft needs and have told all my other gear head friends. So glad now the other company did not respond!!

Gene L, Cary, NC, Aug 28th, 2017

ordered some parts to build a custom drive shaft and parts arived very fast and wraped securly all parts fit as they should I apreciate quality service Rick

RICK F, Bear Lake, MI, Aug 4th, 2017

I ordered a driveshaft from Denny's it came in when they said it would. I gave them the measurements they asked for i put it in and it fit like a glove. very happy with my driveshaft Recommend Denny's Driveshaft to anybody great job guys! Will be doing more business in the future thank you for my driveshaft

Louis G, West warwick, RI, Jul 4th, 2017

What a beautiful piece of work! The drive shaft fit perfectly and your patience and instruction was impeccable.
Also your packaging was the best. I ran the shipping and receiving department locally for a carbide cutting tool company and I know how important it is to package properly. Thanks for an excellent product!

Lynn E, Pittsfield, MA, Jun 29th, 2017

Thank you for such a nice piece. The piece is the best looking driveshaft I've seen. The workmanship was well worth the wait. Everything fit exactly as it should and just as you said it would. I sincerely appreciate the work that went into it. Thank you!

Kim R, Royal Oaks , CA, Jun 19th, 2017

I ordered the rebuild u-joint kit for the front double cardan drive shaft of my 2005 Jeep Wrangler SE TJ 2.4 liter. I chose two day air and it arrived the next day!! Also, the parts were all perfect. I was originally going to buy u-joints locally but there was always something defective in them or the needle bearings felt gritty. The parts from Denny's were absolutely smooth as silk and installed well. My Jeep is running great after rebuilding the driveshaft and is smoother than before and I will definitely be buying from Denny's again. Thank you!

Paul Z, Watervliet, NY, Jun 3rd, 2017

I had a custom 3-12" Alum shaft made for my LS powered 55 Chevy. The workmanship is of high quality. The shaft went right in and was a perfect fit. Just the right clearance and transmission yoke engagement. I couldn't be more pleased and highly recommend Denny's.

Ken W, Newark, CA, May 21st, 2017

Thank you for the driveshaft that you made for my Monza. It fit perfectly which made installation a breeze.
Thanks again for all the input you gave me on the best possible driveshaft that I could get for my car! It was a pleasure dealing with you and your staff........
Best regards.......
Brian Atkinson

Brian A, Welland, May 5th, 2017

Got my driveshaft delivered to me quickly and Jeep back on the road. I am very pleased with both value and customer service from Denny's and highly recommend them.
THANKS, DENNY'S DRIVESHAFTS!!!!!!

JOHN P, Ocala, FL, May 3rd, 2017

Just a quick thank you! You just shortened a heavy duty
driveshaft for me and swapped the 3R end for a 1350. It fits
perfect! You turned that driveshaft around in a week which
really impressed me. Installed it last night and went for a
drive and the driveline is nice and smooth. Thanks for
doing a great job at a great price and for doing it so fast!
I will definitely recommend you guys to all my friends. Jeff

Jeffrey T, Williamsport, PA, Mar 9th, 2017

Denny spoke with me on the phone and discussed everything with me, including every option available for a new yoke. He was kind enough to give me some education I didn't have. I learned a lot from a simple phone call and I also learned where to visit for the best sites of Niagara Falls. At any rate, Denny told me it would be about 4 weeks before I received my order. However, it was exactly 3 weeks to the day and it was delivered. Once I received my driveshaft, which is a 3.5" aluminum shaft for my 68 Camaro and T56 transmission, I opened the box and it was a thing of beauty. It is the first driveshaft that I have ever ordered and I was quite nervous about the measurements. However, when I talked to Denny, he talked me through them so I was even more comfortable when making them. At any rate, when I went to put the driveshaft on, it fit like a glove. It only took me a few minutes to get it installed. Coming with complete installation hardware was a plus as my old ones were not usable any longer.
Thanks Denny for the expert service and timely delivery. I look forward to doing business with you on my next project.
Brian

Brian P, Mar 7th, 2017

I live in Texas and have a project that I've been working on for a couple of years. I heard about Denny's through performancetrucks.net. I downloaded Dennys calculation sheet and ordered a driveshaft for my hot rod. Well a couple weeks later a beautiful driveshaft shows up on my door! The only issue is it was too short. I messed up big time, I sent a bad measurement to Denny! I called Denny in a panic, Denny was very patient and we spent some time correcting my mistake. I sent the drive shaft back and to my surprise received a tracking number 2 days after Denny received it. What great customer service! I wouldn't hesitate to send any one to these guys!

Aidan K, Richmond, TX, Feb 20th, 2017

I have a 1970 dodge super b and i purchased a dennys nitrous ready driveshaft way back in 2003. it has been behind a 12.00 motor a 10.50 motor and a nitrous motor at 9.50. the car weighs 3750 and that driveshaft has over 500 passes on it without even changing a u-joint. it is now being used a daily driver. Awesome driveshaft and recomend to everyone.
Thank You
Ralph Seran 2008 NMCA Nostalgia Muscle Car champion

Ralph S, clayton, NJ, Jan 20th, 2017

Daniel,
I received my parts and they look really good. I haven't test fit everything yet, but I am confident they are just what I want. Thanks for your assistance and your enthusiasm for my project and your job! I'll always come to Denny's for driveshaft parts. Thanks again!

JESSE G, Nov 14th, 2016

I have been experiencing a high speed driveline vibration problem on my 87 Monte Carlo SS ever since I bought it about 5 years ago. Spent several hundred dollars at a local machine shop to have the stock driveshaft balanced, twice!! Even had a new trans yoke installed and the local machine shop even cut off the yokes and squared up the ends of the driveshaft. The result was still the same. The vibration problem was unchanged. Finally decided to order a 1330 Series 3.5 inch Heavy Duty Steel driveshaft from Denny's. It was special order and I got it 4 weeks after I placed the order. It was packaged very well. High quality workmanship. Email questions sent to the tech department were answered promptly. After installing the new driveshaft, my vibration problem is gone. Very satisfied with Denny's.

Frederick G, Glassboro, NJ, Oct 25th, 2016

I simply cannot heap enough praise on the entire staff at Denny's. From initial call to delivery of my new driveshaft, the service was utterly incredible. Special thanks to Daniel for working with me through the entire process. His outstanding technical knowledge and customer service made this far easier than I could have imagined. ...and of course the driveshaft I received was of the HIGHEST quality. I would recommend these guys to anyone and everyone! Many thanks to Denny for running a top-notch business!

Bob C, Saint Marys, GA, Aug 26th, 2016

I SCREWED UP AND BOUGHT A USED YOKE ON E-BAY FOR A $100.00 BUCKS BECAUSE EVERYONE ON LINE SAID THEY WERE VERY HARD TO FIND. BS... YOU HAVE NEW ONES FOR $41.00. YOUR A GREAT CO AND VERY REASONABLE AND GRATE PRODUCTS!

KEITH N, GRAND FORKS, ND, Jun 12th, 2016

I appreciate you offering a kit when I diagnosed the issue on my Jeep being the front driveshaft. Not sure how I found your site but the information contained helped me further diagnose and determine the parts I needed. Expedited shipping options were also beneficial in resolving my problem as soon as possible.
Thank you!

S Ben E, Littleton, CO, Mar 31st, 2016

(March 2016) The fit and finish was incredible on my 1957 Bel Air with 350 SBC and 700R4 trans swap. Beautiful welds, balanced and nicely painted. Used the Denny's measuring sheet and got the perfect fit. Really easy, good price and quality. Will be ordering again soon for a recently obtained project. I would highly recommend Denny's to all my car buddies.

Philip K, Fairfield, CT, Mar 28th, 2016

After losing the driveshaft at New England Dragway at half track.... I bought a Nitrous Ready Driveshaft. Big block Nova, Ford rear end. It was a perfect fit..I also put one in my 1925 Ford street rod. I'm building a Mustang with a 383 Chevy. The driveshaft? You guessed it!! It's a Dennys..I will never run another driveshaft other then Dennys..thanks..Eric

eric m, wells, ME, Feb 19th, 2016

Installed the driveshaft in my Plymouth Scamp. Vibration gone! If I ever need another driveshaft it will come from Denny's. Thanks!

Fred B, Mount Morris, NY, Dec 7th, 2015

I received the yoke and is as stated, I installed the yoke and it is exactly what I needed. Denny's Driveshafts is a great company to deal with.

Danny W, Hartsville, TN, Nov 24th, 2015

Just installed the drive shaft in my 69 road runner . Fits like a glove ! I couldn't be happier with the service . Thank you very much .

GEORGE R, Oct 16th, 2015

I ordered a 1310 slip yoke for a T400 truck trans and it fits perfect. Speedy shipping and great communication. Thanks Dennys

Ned F, Aiken, SC, Jul 20th, 2015

Installed a Denny's driveshaft and Dana spicer flange yoke on my 1964 Dodge Dart GT. The driveshaft replaced the old ball and trunnion style. I had rebuilt the old ball and trunnion style driveshaft but it was worn and vibrated. The new driveshaft runs great and has no vibration. It was also a perfect fit for my Dodge Dart. Thanks for doing a great job!! Steven

Steven S, Nashville, GA, Jul 8th, 2015

JUST INSTALLED MY NEW DENNYS DRIVESHAFT INTO 02 GT MUSTANG WITH A 460 AND C6 AUTO WITH FORD 9 INCH REAR END. FITS PERFECT! FOR ONCE IT IS NICE TO ORDER SOMETHING AND IT FITS. THANKS DENNY'S

ADRIAN S, ELDORADO, IL, Jun 15th, 2015

How ya guys doing. I ordered some driveshaft parts from the guys here at Denny's Driveshafts. I just wanted to compliment how fast the shipping was! Got to my house in 2 days. And they always sell quality parts. Don't hesitate to trust them with your order! Great company!

Jason D, Manhattan, IL, Mar 19th, 2015

I have received and installed my drive shafts and would like to take a minute to thank everyone at Denny's for the knowledge and patience in making sure I had what I needed and not just what I ordered. I am very happy with how the components fit as well as the quality. Your entire staff was always helpful and willing to explain to make sure I had what I needed and understood why I needed it. Thank you for everything.

Dustin S, Fort Wayne, IN, Feb 16th, 2015

We spoke Friday about mating a 350 to the 60 Willy's. Using your site with all the dimensions saved me from making a big mistake. I found I needed a GM 3R yoke and not a 1350. I felt real confident ordering from you with this info. Great help. Thanks again

GEORGE D, Feb 9th, 2015

I ordered a double cardan style driveshaft from Denny's for my CJ7. The team at Denny's worked with me along the way to make sure I had everything I needed for a seamless and trouble free installation.
The driveshaft went in without a hitch and the difference was night and day compared to my old driveshaft. I didn't think I had a bad vibration problem before but was shocked at how smooth the new driveshaft operated both while cruising and under acceleration.
The quality and value of the product is outstanding and the customer service was second to none. I would highly recommend Denny's to anyone needing to replace or upgrade their driveline.

Brian F, Jan 25th, 2015

I received the driveshaft just in time and it is impressive!
The quality is amazing. I will order another one for my 78 Trans am LS3 project from you for sure.

Thanks guys! Qaies Alkaldi, QATAR

Qaies A, Jan 6th, 2015

My driveshaft arrived yesterday and I wanted to let you know how impressed I am with everything. The driveshaft is a perfect fit in every way and is beautifully made and finished. It was packed extremely well and arrived half way around the world (Australia) in top condition. Your customer service and quick response to emails has also been excellent. It's easy to see why your business has earned the great reputation it has. Thanks for an excellent driveshaft!
Regards,
Andrew P. Australia

Andrew P, Jan 2nd, 2015

just wanna drop some good feedback and let you know yal have a new customer. just got my axle shaft that i ordered thursday nite and i didnt expect to see it til after christmas. you guys got it here wickedly fast. thank you so much, i cant wait to get my truck back in the woods. should something else break when i do, i know im hittin up dennys for my parts!!!!!!!!!!!!

John L, Dec 22nd, 2014

I'm lucky owner of a 1967 Chevy Camaro SS RS Big block with a 427 engine. Car is a 1:1 Copo Camaro clone.
Since I own this California car now (4 years) I had to struggle with annoying vibrations in my drivetrain. This also wrecked my Muncie M-21 gearbox, 1 year ago and I had to replace it. I spent any effort to locate reason for this vibrations, during this I had the driveshaft balanced. Since I could not locate it and driveshaft was balanced I had no clue, where it will come from.
So, after lots of nights with thinking about it and some talks to my engine builder, we came to the result, to replace the driveshaft no matter what.
Then I start doing some research to find a good manufacturer for this new driveshaft. With my car I learned that even the best parts are good enough and will be hassle free.
Thanks to the lots of testimonials from happy customers all over the world I decided for Denny's!
This was the best decision, by the way.
I started reporting about my issue and sending some pics of my driveshaft. They could see on pics itself that this will match to my problem I told them about. This gave me some confidence that I might be on the right track.
I couldn't wait it until to have the new driveshaft at home. Even if he told an approximately delivery time of 4 weeks, the driveshaft arrived earlier. Shipping within 2 days from USA to Germany with UPS!
Unfortunately the driveshaft was 1.5 inches to short, my mistake. I get in touch with Denny and he was really willing to help me out and we had some nice email traffic. After I send him the right length of the driveshaft, measured multiple times to make sure not to make another fault, he really took any effort to build me a new driveshaft and had it shipped out within one week.
After I unpacked the new one (second) I first measured it and saw he build it exactly as I send him the new measurement.
I was pretty sure, this time I did everything right and it will fit.
Next day I bolted the driveshaft in my car and fits perfect.
Not to be to early with my enthusiasm I made a test drive.
WOW! I cannot say how much happy I am now. All the vibrations and noises from the body this vibrations caused in my car are gone!!
Its hard to believe its same car. Now it drives smooth and like a new car. No need to be afraid anything could break now when I push the pedal.
THANKS a lot for everything, Denny!!!

Stephan E, Sep 7th, 2014

Denny's built the driveshafts for my 68 Mustang ProStreet car and my 11 second 67 Chevelle Wagon bracket racecar. So when it came to finding a unique driveshaft for my 2001 Jeep Cherokee 4x4 Mud BogStreet cruiser, it was a total no-brainer who to turn to when I needed a shaft to connect my NP231 transfer case to my custom built Ford 9" rear axle. It arrived in a few weeks ready to bolt in and the fit was excellent. No vibration on my lifted Jeep whatsoever. When people ask me who built the driveshaft I tell um, Denny's are the go to people to connect any diff to any transmission, no matter how much power you put to the ground. I only wished they still put the contingency size decals in the box for the side of your racecar like they used to when they built my Mustang shaft back in 1997. Yep, I'm a lifetime customer!

Eddie B, Wailuku, HI, Jul 31st, 2014

I received my driveshaft and wanted to let you know that I am very happy with it. After bolting it in I lost that annoying harmonic vibe from the old shaft. Thank you for the fine workmanship and professionalism.

JOHN F, JACKSON, NJ, May 22nd, 2014

Got my parts sooner than expected , was exactly what I needed. You guy's are awsome!!!! You all will be hearing from me again soon. Having a Rear end noise. THANK YOU !!! Rene

Rene R, Casa Grande, AZ, May 21st, 2014

Hello Denny's Driveshaft,
I wanted to take a minute of your time to thank you for a Superb Product!!
Everything was just as you said from build time, to price, and ship date.
The Quality of workmanship and product material far exceed the standard. I
sincerely thank you for your 5 star services!!
Respectfully, Scott Edwards, CIV USAF AFDW-11WG (US)

SCOTT E, May 8th, 2014

Denny's
I received my drive shaft the other day. It fit perfectly of course and looked so nice I hung it over the fireplace for a few days to admire it before putting it in the car.
Denny helped me with drive line angles and now the car is perfect!!!
Thanks to all
Mike

Mike Z, Ellington, CT, Apr 30th, 2014

Thank you for a great driveshaft for my roadster. It fit perfect and looks good too. The service was excellent and it arrived sooner than expected. It is nice to do business with a company that does what it says it will do.
Thanks again.

John N, lyndhurst, OH, Mar 16th, 2014

You guys are awesome... Extremely fast shipping... Quality Spicer parts, you had exactly what I was looking for at great prices, especially the CV bolts I needed that I couldn't find anywhere else for some really odd reason (you would think those are needed often...) I would definitely order from you guys again thank you!

Amy H, Shirley, NY, Mar 6th, 2014

What can I say? Not only did they have the correct part for my differential, the measuring was easy and when the product arrived, it fit perfectly, something hard to find in the world of hot rodding. Excellent advice and everything was spot on.
I will use Denny's again

Alan J, Green Bay, WI, Feb 22nd, 2014

Just wanted to give a shout out! I wish I would have got the mans name I spoke with on the phone. He deserves some praise. Once I explained my delima I was in and the urgency of getting the part overnight he went above and beyond to meet my needs. Im not used to customer service like this since everyone else "seems" not to care. Again thank you again for your superior service. Today is Thursday, I ordered yesterday and recieved the part this morning. You guys are the best and I will tell every one I know.

David P, Bristol, VA, Feb 6th, 2014

Professionalism at its best. A very knowledgeable and courteous staff. My questions were answered and, unlike other places I've dealt with, I wasn't expected to know more than the guy I talked with on the phone. An easy to navigate website, great prices, packaged very well,and fast reasonable shipping. I will be doing all my business through you. Thank you.

Wayne C, Jan 29th, 2014

I just put the new rear driveshaft you built for my 1977 F-150 4x4 short box and took it for a quick 10 km run --- truck drives like new and I am extremely pleased. Workmanship was excellent and I will be ordering a new front shaft in the near future.
Thanks for an excellent job and I will recommend you to anyone I know that needs a new driveshaft.

john h, Oldcastle, Dec 19th, 2013

Its very rare these days to find a company, either large or small, that will take extraordinary steps for customer satisfaction. However, Denny's Driveshafts is one such enterprise and the efforts they expend for their customers is unprecedented. If you have a need for either a complete driveshaft or individual components stop when you get to Denny's. You won't find better or more dedicated service!
Development Engineer, A. G. Fuels Research

H. W, Dec 9th, 2013

1-70 of 149 Matching Results Found
<< Previous  123  Next >>
Results per Page:
DennysDriveshaft.com - © Copyright 2018-Present

Website and Web Hosting by Online Media
Online Media - Buffalo's Web Hosting Company