DennysDriveshaft.com
Free Shipping on Orders Over $99.00

Product Search
Denny's Driveshaft builds custom steel and aluminum driveshafts for your high performance car, street rod, race car, van, pick up or 4x4 truck
 
AAM 74081555 Universal Joint 1555 series fits DODGE 2500/3500 AAM Rear Driveshaft and 9.25 Front Axles
Part #:
74081555
Your Cost $38.95

AAM 74081555 UNIVERSAL JOINT

1555 series American Axle Manufacturing U-Joint

  • Fits 2006 and newer Dodge RAM 1555 series REAR Driveshafts made by AAM American Axle Manufacturing
    • Comes with OUTSIDE Snap Rings to be used in 1555 series Driveshafts
    • Dimension A & B = 4.965 inches
    • Dimension C & D = 1.375 inch diameter
    • DOES NOT FIT DANA SPICER 1550 SERIES DRIVESHAFTS
  • ALSO Fits Dodge 1555 Series 2010 and newer RAM 2500 and RAM 3500 4X4 Front Axle Shafts on AAM 9.25 inch Front Differential
    • Comes with INSIDE "C" Clips to be used in 1555 series Front Axles
    • All 4 bearing caps are 1.375 inch diameter with inside "C" Clips to lock the cap in place. 
    • 3.702 inches = The span between the yoke inner surfaces where the "C" Clips lock in.

AAM
AAM 74081555 Universal Joint 1555 series fits DODGE 2500/3500 AAM Rear Driveshaft and 9.25 Front Axles
AAM 74081555 Universal Joint 1555 series fits DODGE 2500/3500 AAM Rear Driveshaft and 9.25 Front Axles
FOR FASTER SERVICE, PLEASE ORDER ALL PARTS ONLINE
STATUS:  IN STOCK
YOUR COST:  $38.95

AAM 74081555 UNIVERSAL JOINT

1555 series American Axle Manufacturing U-Joint

  • Fits 2006 and newer Dodge RAM 1555 series REAR Driveshafts made by AAM American Axle Manufacturing
    • Comes with OUTSIDE Snap Rings to be used in 1555 series Driveshafts
    • Dimension A & B = 4.965 inches
    • Dimension C & D = 1.375 inch diameter
    • DOES NOT FIT DANA SPICER 1550 SERIES DRIVESHAFTS
  • ALSO Fits Dodge 1555 Series 2010 and newer RAM 2500 and RAM 3500 4X4 Front Axle Shafts on AAM 9.25 inch Front Differential
    • Comes with INSIDE "C" Clips to be used in 1555 series Front Axles
    • All 4 bearing caps are 1.375 inch diameter with inside "C" Clips to lock the cap in place. 
    • 3.702 inches = The span between the yoke inner surfaces where the "C" Clips lock in.

<<<<< IMPORTANT ...PLEASE READ THIS >>>>>

AAM Universal Joints have extremely good seals on each cap and it is difficult to compress the caps onto the body all the way using only your hand.

We have included this information because many customers have had concerns that the u-joint appears to be too wide when it is actually the correct width.

  • When you receive this u-joint you will notice that it appears wider than the posted dimension but if you compress the caps onto the body using a bench vise you will see that it is the correct width dimension. 
  • Once you compress the caps onto the body you will find each cap has locked on and will require extra effort to remove the caps.  Please do this carefully so you do not damage the seals or lose any needle bearings.
  • Compressing the caps is not necessary to install the u-joint into the driveshaft but we have included this information because many customers have had concerns that they do not have the correct part because it appears to be too wide.

 

image/jpeg
AAM 74081555 Universal Joint 1555 series fits DODGE 2500/3500 AAM Rear Driveshaft and 9.25 Front Axles

AAM 74081555 Universal Joint 1555 series fits DODGE 2500/3500 AAM Rear Driveshaft and 9.25 Front Axles

Enter your email address and we'll send you a message when this item is available

Please enter your email address in order to be notified when this item is available.
DennysDriveshaft.com - © Copyright 2020-Present

Website and Web Hosting by Online Media
Online Media - Buffalo's Web Hosting Company