DennysDriveshaft.com
Free Shipping on Orders Over $99.00

Product Search
Denny's Driveshaft builds custom steel and aluminum driveshafts for your high performance car, street rod, race car, van, pick up or 4x4 truck
 
DE-15688 Installation Tool for use with Rubber Boot Part Number 2-86-418
Part #:
DE-15688
Your Cost $24.95

DE-15688 Installation Tool

Rubber Boot Installation Tool

Use this handy tool when replacing the Rubber Boot on your CV Driveshaft. 

Dennys TOOLS
DE-15688 Installation Tool for use with Rubber Boot Part Number 2-86-418
Denny's Driveshafts DE-15688 Installation Tool for rubber boot on CV Stud Yoke
STATUS:  IN STOCK
YOUR COST:  $24.95

DE-15688

Rubber Boot Installation Tool

Use this handy tool when installing Rubber Boot ... Part Number: 2-86-418 ... onto your 1310, 1330 or 1350 series CV Driveshaft. 

It's a simple job to replace the rubber boot on the CV stud yoke when you have the proper tools but it can be a real problem if you don't.

Can be used with a hydraulic press or it can be used by striking it with a mallet.  In either case it makes the job simple and there is no damage done to the rubber boot during installation. 

 TIP:  Remember to look for and to remove the old metal ring from the old rubber boot.  Look closely to see if it is still on the CV Stud Yoke.  If it is you can easily remove it with a screw driver and a small hammer.  A small tap with the hammer and the old metal ring should come right off.   

DE-15688 Installation Tool for use with Rubber Boot Part Number 2-86-418

Denny's Driveshafts DE-15688 Installation Tool for rubber boot on CV Stud Yoke

Click to Load this Photo
Click Here to Enlarge
Click to Load this Photo
Click Here to Enlarge

You May Also Need These Parts to Complete the Job

DANA SPICER 2-86-418 - Rubber Boot for Dodge OEM Non Greaseable CV Centering Yoke
$4.95

DennysDriveshaft.com - © Copyright 2017-Present

Website and Web Hosting by Online Media
Online Media - Buffalo's Web Hosting Company