Dana Spicer 5-1350X Universal Joint 1350 Series NON Greasable U-Joint for 1963-1996 Corvette C2, C3, C4 REAR AXLE half shafts

DANA SPICER 5-1350X

1350 SERIES UNIVERSAL JOINT

For C2, C3, C4 Chevrolet Corvette Rear Axle Half Shafts

• 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982,1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996
• DOES NOT FIT some models from 1980 -1983 with 1330 series half shafts with 1.062 diameter universal joint bearing caps 

NON GREASEABLE for superior strength

• Super strong , high mileage with no greasy mess splattered all over your Corvette chassis
• Factory lubed with the correct amount of Dana Spicer synthetic grease for excellent friction reduction
• Multi lip seals keep the grease in ... water and contaminants out!
• Cold-forged solid body to ensure better wear and overall strength
• Heat treated, Case hardened and precision ground bearing caps for durability and the best press fit
• Thrust washers in the bottom of each bearing cap to eliminate metal on metal contact at the end of the journal to prevent wear and will lower overall operating temperature.
• Comes with standard thickness copper colored outside style snap rings and also two thicker snap ring versions to allow the experienced installer to control the end play when necessary.

DIMENSIONS

• Outside Snap Ring Style
• (A) Cap to Cap installed dimension = 3.625 inches ...when fully compressed
• (B) Cap to Cap installed dimension = 3.625 inches ...when fully compressed
• (C) Bearing cap diameter = 1.188 inches
• (D) Bearing cap diameter = 1.188 inches

RECOMMENDATION

It is our opinion here at Denny's Driveshafts that the Dana Spicer 5-1350X universal joint is the absolute best choice when purchasing a 1350 series u-joint.   This is the one to use when building or repairing a high performance street car, 4x4 truck for on or off road use and for all high powered - high rpm drag race, road race and circle track racing applications.

 OPTIONS - see bottom of your screen

• Greaseable version ...
  • Dana Spicer 5-1350-1X cross drilled body with lube fitting in end of one bearing cap
  • Dana Spicer 5-178X cross drilled body with lube fitting in body
• Non Greaseable Coated version ....
  • Dana Spicer 5-3615X with coated bearing caps for aluminum drivelines

If you need 4 Universal Joints then scroll down to select the Rebuild Kit at the bottom of your page.