UPGRADE MW 39034 Chromoly Slip Yoke necessary for JERICO and G-FORCE Transmissions with 32 spline BUSHING output and 1.885 barrel diameter use on Denny's NR-3CM, NR-3.5CM, NR-3PRO, NR-3.5PRO Driveshafts ONLY

UPGRD-39034

UPGRADE to MW 39034 Slip Yoke

• Upgrade to the Mark Williams Enterprises 39034 Chromoly Slip Yoke 1350 Series nessary for JERICO and G-FORCE Transmissions with 32 spline BUSHING output and 1.885 barrel diameter for use on the following Nitrous Ready Driveshafts ONLY:
  • For Denny's NR-3CM Nitrous Ready Driveshaft
  • For Denny's NR-3.5CM Nitrous Ready Driveshaft
  • For Denny's NR-3PRO Package Nitrous Ready Driveshaft
  • For Denny's NR-3.5PRO Package Nitrous Ready Driveshaft
• NOT available for NR-3 and NR-3.5 with Sonnax slip yokes

NOTE: This is an UPGRADE.  This is not a part to be ordered separately. 

This UPGRADE MUST be ordered along with one of the driveshafts listed.

1350 Series Forged 4340 Chromoly Transmission Slip Yoke fits Jericho and GForce transmissions

For use on JERICO and G-FORCE transmissions with BUSHING in tailshaft housing

• Length to center of u-joint... Dimension #1 = 6 1/8 inches
• Barrel Diameter... Dimension #2 = 1.885 inches
• Barrel Length... Dimension #3 = 4 3/16 inches
• U-joint cap diameter... Dimension #4 = 1 3/16 inches
• U-joint width... Dimension #5 =  3 5/8 inches
• Series... 1350
• Outside Snap Ring style
• Spline count... 32