Denny's SRHD3-S1 Street Rod HD Driveshaft 3 inch Stage 1 complete with Dana Spicer U-Joints and Sonnax 1310 Forged Slip Yoke

Denny's SRHD3-S1

Street Rod HD Driveshaft 3 inch Stage 1 with Sonnax 1310 Slip Yoke

• STAGE 1 is recommended for use with less than 500 horsepower.
  
  • For higher horsepower please see our 3 inch Stage 2 Street Rod HD Driveshaft

Includes:

• 3 inch Diameter Tube - DOM Steel
  • "IF YOU CAN POSSIBLY TWIST OUR STREET ROD STEEL DRIVESHAFT TUBING OR BREAK OUR WELDS...WE'LL REPLACE IT FREE"
  • All Denny's Driveshafts are built using the latest computer controlled welding equipment for the strongest welds possible.
  • All Denny's Driveshafts are High Speed - High RPM Balanced and Tested for smooth operation.  This is priceless when it comes to customer satisfaction!
  • All Denny's Driveshafts come Fully Assembled and Balanced with slip yoke and universal joints.... ready to bolt in!
• SONNAX 1310 series FORGED SLIP YOKE to fit most of the popular transmissions
  • ►Available to fit 27 and 32 spline GM automatic transmissions
  • ►Available to fit 27 and 32 spline Muncie, Borg Warner, AutoGear, Saginaw, Richmond
  • ►Available to fit 28 spline Ford C4 and AOD automatics
    • NOT available in 1310 for 28 spline Ford 4R70W ... Please CLICK HERE for Stage 2 Driveshaft
    • NOT available in 1310 for 31 spline Ford ... Please CLICK HERE for Stage 2 Driveshaft
  • ►Available to fit 28 spline for T5, T10, Top Loader, and Tremec with 28 spline output only
    
    • If you have a 31 spline output ... CLICK HERE for Stage 2 Driveshafts
  • NOT Available in 1310 for DODGE transmisions...  Please CLICK HERE for Dodge Driveshafts
• Dana Spicer NON Greaseable Universal Joints
  • FRONT universal joint 1310 series to match slip yoke
    
  • REAR universal joint can be 1310, 1330, 1350, 7260, 7290, 3R to match your rear end pinion yoke.
    • Flat Flange Yoke option available for Ford 8.8 and JAG rear
• MAXIMUM LENGTH for 3 inch is 55 inches for Dimension B6 on Diagram "B"
  
  • Please contact us by email if you require a longer length with a 3 inch tube OD.  CLICK HERE
• MAXIMUM LENGTH for 3 inch is 57 inches for Dimension 55 on Diagram "K"
  • Please contact us by email if you require a longer length with a 3 inch tube OD.  CLICK HERE

• 
  • Denny's Free Lifetime Labor means for example if you ever need it shortened, re-balanced, change u-joints....the Labor is FREE    
    • Please see our Free Lifetime Labor page for details. CLICK HERE
      

HOW TO MEASURE

You have 2 choices ...see both choices below

CHOICE >>>>>> If your rear end has a u-bolt or strap and bolt style PINION YOKE then use Diagram "B": 

• MAXIMUM LENGTH restrictions for SRHD3-S1:
  
  • DIAGRAM "B" ...Number "B6" should be approximately 55 inches or less. 
    
    • Please contact us by email if you require a longer length with a 3 inch tube OD.  EMAIL CLICK HERE
    • If a longer length is required please see our 3.5 inch Street Rod HD Stage 1 Driveshaft
• CLICK HERE to see Diagram "B" now

CHOICE >>>>>> Use Diagram "K" ONLY if you have a Ford 8.8 or JAG rear with a FLAT FLANGE.

• PLEASE NOTE:  There will be an Additional cost for the correct flange yoke.  CLICK HERE for Flange Yokes
• MAXIMUM LENGTH restrictions for SRHD3-S1:
  
  • DIAGRAM "K" ...Number "55" should be approximately 57 inches or less. 
    • CLICK HERE to see Diagram "K" now
    • Please contact us by email if you require a longer length with a 3 inch tube OD.  EMAIL CLICK HERE
    • If a longer length is required please see our 3.5 inch Street Rod HD Stage 1 Driveshaft
  • DIAGRAM "L" ...we will also need NUMBERS 58, 59 and 60 on this page to build your order
    
    • CLICK HERE to see Diagram "L" now
• 
  

OVERSIZE PACKAGE: Sorry ... this item DOES NOT qualify for Free Shipping!