FORD DL3Z-4851-A Pinion Flange 2 inch pilot 4.25 inch bolt circle 30 splines fits Ford 8.8 inch car and light truck rear ends up to 2004

FORD DL3Z-4851-A

Pinion Flange to fit Ford 8.8 inch rear ends up to 2004

Fits car and light truck 8.8 inch rear ends up to 2004

• 4.25 inch bolt circle
• 2 inch pilot
• 30 splines
• Flange has eight bolt holes equally spaced to mount driveshaft . Only 4 of the holes are needed to mount a flange yoke.
• Use original equipment bolts or select replacements at the bottom of this page
• Can be used with 1310, 1330 and 1350 series Flange Yokes ...see bottom of page

Use this pinion flange to upgrade from the smaller 3.5 inch bolt circle Ford bolt pattern typically found on Mustangs