Dana Spicer 211355X 1310 CV Centering Yoke fits Jeep ALL Models up to 1993 GREASABLE

DANA SPICER 211355X

Jeep CV Driveshaft Greaseable Centering Yoke 1310 Series

• Use on 1310 series CV Driveshaft to repair or rebuild Double Cardan Joint
• Greasable center ball socket
• New spring Included

• Fits 1310 U-Joint
  
  • (3.219 inches) 3-7/32 inches between locating tabs on centering yoke
    
  • (1.062 inches) 1-1/16 inch dimension of saddle to hold U-Joint Bearing cap
• Bolt Holes are 5/16 - 24 fine thread
  • Bolt hole spacing 1.500 inches across u-joint cap
  • Bolt hole spacing 2.343 inches side to side
• Fits .500 inch stud diameter

• New spring Included

Fits 1310 Series CV Driveshafts in the following Jeep models:

• 1982 - 1988    10 Series
• 1979 - 1988    20 Series
• 1979 - 1981    40 Series
• 1986 - 1993    Briarwood
• 1986 - 1993    Cherokee Compact (XJ)
• 1974 - 1983    Cherokee Fullsize (SJ)
• 1979 - 1981    CJ5
• 1979 - 1981    CJ7
• 1986 - 1992    Comanche
• 1993                 Grand Cherokee
• 1983 - 1991    Grand Wagoneer
• 1981                 Scrambler CJ8
• 1978 - 1991    Wagoneer

NOTE: 1994 and newer will be the NON Greaseable 211544X centering yoke.  CLICK HERE