Denny's STR-3 Street Rod 3 inch Driveshaft with 1310 slip yoke and Dana Spicer universal joints
STR-3
Denny's STR-3
Custom Built 3 inch Denny's Street Rod Driveshaft complete with Slip Yoke and Universal Joints
- Recommended for STREET use with less than 500 horsepower
- 1310 slip yoke and front u-joint
- Any size rear u-joint to match your rear end yoke. See details below!
Limited Supply: only 1 remaining
Availability: THIS ITEM CAN BE
BACK ORDERED -
PLEASE EMAIL VEHICLE
DETAILS, DIMENSIONS
AND PHONE NUMBER
Pricing:
$525.95
Description
Denny's STR-3
Custom Built 3 inch Denny's Street Rod Driveshaft complete with Slip Yoke and Universal Joints
- Recommended for STREET use with less than 500 horsepower
- 1310 slip yoke and front u-joint
- Any size rear u-joint to match your rear end yoke. See details below!
Includes:
- 3 inch Diameter Tube - DOM Steel
- "IF YOU CAN POSSIBLY TWIST OUR STREET ROD STEEL DRIVESHAFT TUBING OR BREAK OUR WELDS...WE'LL REPLACE IT FREE"
- All Denny's Driveshafts are assembled using the latest computer controlled welding equipment for the strongest welds possible.
- Spicer or Neapco 1310 series SLIP YOKE
- Available to fit 26 spline Chrysler 904 automatic and 26 spline manual transmission
- Available to fit all 27 and 32 spline GM automatic transmissions
- Available to fit all 27 and 32 spline Muncie, Borg Warner, AutoGear, Saginaw, Richmond
- Available to fit 28 spline Ford C4 and AOD automatics (NOT available in 1310 for 4R70W see 1330 shafts)
- Available to fit 28 spline T5, T10, Top Loader, Tremec
- Available to fit 31 spline Ford C6, FMX, Top Loader, Tremec TKO600, T56 Magnum
- Dana Spicer NON Greaseable Universal Joints
- FRONT universal joint 1310 series to match slip yoke
- REAR universal joint can be 1310, 1330, 1350, 7260, 7290, 3R to match your rear end pinion yoke.
- ***Flat Flange Yoke option available for Ford 8.8 and JAG rear
- ***Please be sure to add the correct flange yoke to the shopping cart when placing your order
- FRONT universal joint 1310 series to match slip yoke
- All Denny's Driveshafts are High Speed - High RPM Balanced and Tested for smooth operation. This is priceless when it comes to customer satisfaction!
- All Denny's Driveshafts come Fully Assembled and ready to bolt in!
- Denny's Free Lifetime Labor means for example if you ever need it shortened, re-balanced, change u-joints....the Labor is FREE
- Please see our Free Lifetime Labor page for details. CLICK HERE
-
- Denny's Free Lifetime Labor means for example if you ever need it shortened, re-balanced, change u-joints....the Labor is FREE
HOW TO MEASURE
You have 2 choices ...see both choices below
CHOICE 
>>>>>> If your rear end has a u-bolt or strap and bolt style PINION YOKE then use Diagram "B":
- MAXIMUM LENGTH restrictions for STR-3:
- DIAGRAM "B" ...Number "B6" should be approximately 55 inches or less.
- If a longer length is required please see our 3.5 inch Street Rod Driveshaft
- DIAGRAM "B" ...Number "B6" should be approximately 55 inches or less.
- CLICK HERE to see Diagram "B" now
CHOICE 
>>>>>> Use Diagram "K" ONLY if you have a Ford 8.8 or JAG rear with a FLAT FLANGE.
- PLEASE NOTE: There will be an Additional cost for the correct flange yoke.
- MAXIMUM LENGTH restrictions for STR-3:
- DIAGRAM "K" ...Number "55" should be approximately 57 inches or less.
- CLICK HERE to see Diagram "K" now
- If a longer length is required please see our 3.5 inch Street Rod Driveshaft
- DIAGRAM "L" ...we will also need NUMBERS 58, 59 and 60 on this page to build your order
- DIAGRAM "K" ...Number "55" should be approximately 57 inches or less.
OVERSIZE PACKAGE: Sorry ... this item DOES NOT qualify for Free Shipping!
Details
- STR-3
- STR-3
- Dennys
- Available
- THIS ITEM CAN BE BACK ORDERED - PLEASE EMAIL VEHICLE DETAILS, DIMENSIONS AND PHONE NUMBER
- New
