DANA SPICER 2-86-418 Rubber Boot for OEM Non Greaseable CV Centering Yoke

DANA SPICER 2-86-418

Rubber Boot for Double Cardan CV driveshafts.  Use on NON Greaseable OEM 1310 & 1330 Series CV Driveshafts.  Rubber boot is necessary to keep dirt away from center bearing.

• Use on 1310 & 1330 Series OEM CV Driveshaft to repair or rebuild Non Greaseable Double Cardan Joint
• Should always be replaced when repairing or rebuilding a Double Cardan Driveshaft
• Rubber Boot has metal reinforced collar to press firmly onto driveshaft yoke

 TIP:  Remember to look for and to remove the old metal ring from the old rubber boot.  Look closely to see if it is still on the CV Stud Yoke.  If it is you can easily remove it with a screw driver and a small hammer.  A small tap with the hammer and the old metal ring should come right off.