NEAPCO 1-0018 Strap and Bolt Set - Fits DODGE 7290 SERIES pinion yokes and transfer case yokes with 1.125 inch bearing caps

NEAPCO 1-0018 Strap and Bolt Set - Fits DODGE 7290 SERIES with 1.125 inch bearing caps

DODGE 7290 Series Strap & Bolt Set OEM Replacement strap and bolt set complete with (2) Steel Straps and (4) bolts.

Strap and Bolt Set for DODGE 7290 series pinion yokes and transfer case yokes

Be sure to replace your existing strap and bolt set to eliminate the chance of the u-joint cap rotating in the pinion yoke and permanently damaging it. When this happens the damage to the pinion yoke usaully allows the universal joint to move from side to side within the yoke and the resulting looseness will surely cause a nagging vibration. The strap is designed to conform to the shape of the universal joint bearing cap when the bolts are tightened to the proper torque spec and is also designed to apply the proper amount of pressure to hold the bearing cap from rotating within the yoke. Reusing the straps many times will lessen their ability to apply the right holding pressure....this is why you should replace them...it's much cheaper and easier to replace than a new pinion yoke.

• Strap & Bolt Set comes with (2) steel straps and (4) bolts
• Fits all DODGE MOPAR 7290 series strap and bolt style pinion yokes and transfer case yokes. 7290 series is commonly known as the "Large" Chrysler u-joint.
• Fits 1.125 inch bearing caps on all Dodge 7290 series pinion yokes and transfer case yokes

BEARING SIZE: 1.125BOLT HOLE DIAMETER: 0.280CL TO CL: 1.530FITS SERIES: 7290BOLT LENGTH UNDER HEAD: 0.59STRAP WIDTH: 0.620THREAD SIZE: 0.250 - 28 (1/4 DIAMETER)