Dana Spicer 5-153X Universal Joint fits 1987 to 1995 Jeep Wrangler YJ Rear Driveshaft at rear end 1310 Series GREASABLE Fitting in Body

DANA SPICER 5-153X

1310 Series Greasable Universal Joint

• Rear Driveshaft u-joint at REAR END ONLY
  
  • Note: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995 Jeep Wrangler YJ will have two choices for rear driveshaft universal joints at rear end pinion yoke.
    
• CHECK the DIMENSIONS listed below before ordering

• Dana Spicer 5-153X GREASEABLE U-Joint
• Grease Fitting in body of u-joint
• 1310 series dimensions
  • A & B = 3.219 inches (3 7/32)  wide in both directions
  • C & D = All 4 bearing caps are 1.0625 inch (1 1/16) diameter
  • Outside snap rings

IMPORTANT NOTE....This u-joint will be required if the rear u-joint at the pinion yoke is the same size u-joint at the transfer case (3-7/32 inches)

See 5-213X if you require a wider (3-5/8 inch) u-joint at the pinion yoke.