Additional Images

Dana Spicer 73579-1X INNER AXLE Drivers Side 19.19 inches 15 Splines fits 1988 to 1993-1/2 DODGE W150, W200, W250 with DANA 44 Disconnect Front Axle

SKU: 73579-1X

DANA SPICER 73579-1X

INNER AXLE SHAFT - DRIVERS SIDE
- Fits 1988 to 1993-1/2 DODGE W150, W200, W250 with DANA 44 Disconnect front axle
  - CHECK to be sure Dimension C = 19.19 inches on original axle before buying
  - If your inner axle shaft dimension C = 18.32 inches ...See Part Number 73579-2X

YOU HAVE 2 CHOICES....READ CAREFULLY and CHECK Dimension C BEFORE ORDERING

IMPORTANT NOTES:

73579-1X DOES NOT FIT 1985 TO 1987 with the bearing and seal at the end of the left side housing tube.
73579-1X DOES NOT have the machined bearing surface required on the 1985 to 1987

Limited Supply: only 2 remaining

Pricing: $567.95

Description

DANA SPICER 73597-1X

INNER AXLE SHAFT - DRIVERS SIDE
- Fits 1988, 1989, 1990, 1991, 1992, 1993, 1993-1/2 DODGE W150, W200, W250 with DANA 44 Disconnect front axle
  - CHECK to be sure Dimension C = 19.19 inches on original axle before buying
  - If your inner axle shaft dimension C = 18.32 inches ...See Part Number 73579-2X

YOU HAVE 2 CHOICES....READ CAREFULLY and CHECK Dimension C BEFORE ORDERING

IMPORTANT NOTES:

73579-1X DOES NOT FIT 1985 TO 1987 with the bearing and seal at the end of the left side housing tube.
73579-1X DOES NOT have the machined bearing surface required on the 1985 to 1987

DIMENSIONS

15 SPLINES
C1 = 1.59 inch diameter with 15 splines
C = 19.19 inches Centerline of u-joint to end of yoke
Requires 5-760X Axle Universal Joint
- U-Joint Snap Ring Dimension = 2.188 inches ( 2 3/16 inches )
- U-Joint Bearing Cap Diameter = 1.188 inches ( 1 3/16 inches )