UPGRADE MW 39015 Chromoly Slip Yoke necessary for LENCO Transmissions with 16 spline for use on Denny's NR-3CM, NR-3.5CM, NR-3PRO, NR-3.5PRO Driveshafts ONLY

UPGRD-39015

UPGRADE to MW 39015 Slip Yoke

• Upgrade to the Mark Williams Enterprises 39015 Chromoly Slip Yoke 1350 Series necessary for Lenco Transmissions with 16 spline output on the following Nitrous Ready Driveshafts ONLY:
  • For Denny's NR-3CM Nitrous Ready Driveshaft
  • For Denny's NR-3.5CM Nitrous Ready Driveshaft
  • For Denny's NR-3PRO Package Nitrous Ready Driveshaft
  • For Denny's NR-3.5PRO Package Nitrous Ready Driveshaft

• NOT available for NR-3 and NR-3.5 with Sonnax slip yokes

NOTE: This is an UPGRADE.  This is not a part to be ordered separately. 

This UPGRADE MUST be ordered along with one of the driveshafts listed.

DIMENSIONS

• Length to center of u-joint... Dimension #1 = 4 inches
• Barrel Diameter... Dimension #2 = 1.886 inches
• Barrel Length... Dimension #3 =  2 inches
• U-joint cap diameter... Dimension #4 = 1.188 inches
• U-joint width... Dimension #5 =  3.625 inches
• Series... 1350
• Spline count... 16
• Spline diameter 1.375 inches