Dana Spicer 2-3-14191X Slip Yoke 1330 Series fits Dodge 1996 to 1998 NP231D transfer case

DANA SPICER 2-3-14191X

1330 Series Transfer case slip yoke

• Fits some 1996 to 1998 Dodge NP231D Transfer case
• You MUST measure barrel diameter before buying.  Be sure that Dimension "R" is 1.558 inches
  • NOTE: This usually requires a 1330 to 7290 combination u-joint when connecting this outside snap ring style slip yoke to a stock inside "C" clip style driveshaft
  • NOTE: This slip yoke DOES NOT FIT any 27 spline GM transmissions

• Spline/Hole Outside Diameter = 1.176
• Number of Splines = 26/27
  
  • this slip yoke will have 26 internal splines and 1 wide space
  • transfer case output shaft will have 27 splines
• Series = 1330
• Lock up style = OUTSIDE SNAP Ring
• Universal Joint Width = 3.625
• D - Universal Joint Bore = 1.062
• J - Center of u-joint bore to End of Slip yoke = 7.290
• R - Barrel Outside Diameter = 1.558

CLICK HERE : For ALL DANA SPICER Slip Yoke Part Numbers, Specifications and Dimensions