Dana Spicer 212024XKT-2 Double Cardan CV Head Assembly 1350 series KIT NON Greaseable u-joints fits FORD with 4.25 inch bolt circle and 2 inch pilot on front or rear transfer case flange

Dana Spicer 212024XKT-2

Double Cardan CV KIT

• Fits OEM and aftermarket 1350 series FRONT or REAR driveshafts that are built with a 1350 NON greaseable stud yoke.
  
  • DOES NOT FIT any greaseable style 1350 series stud yokes
  • DOES NOT FIT OEM Driveshaft with press on ball.
• Fits Ford Bronco, F150, F250, F350 transfer case front or rear output flange with 2 inch pilot diameter
  
  • NOTE: Some rear potput flanges had the 2.68 inch pilot diameter ...please check this before ordering
• 1350 Series NON Greaseable Center yoke
  • 4 Mounting holes are threaded to accept OEM Ford bolts
  • Needle Bearing Ball Socket fits 1/2 inch stud yoke

<<<<<<SCROLLDOWN to see photos for comparison

IMPORTANT: The "SPICER" name must be visible on your original H-Yoke and Flange yoke to use these replacement parts. 

If you have a driveshaft that looks like the one in these photos then this cv kit will NOT work.

• Please notice the shape of the mounting flange...if yours looks like the mounting flange in the photo on the left then this CV Kit will not fit.
• Please notice the squared shape of the H-Yoke around the holes for the u-joint cap and snap ring in the photo on the right. ... If yours has the squared shape then this CV Kit will not fit.
• If you have a driveshaft with a pressed on ball on the cv stud yoke then this cv kit will NOT work.

INCLUDES

• (1) 212024X ...Dana Spicer 1350 NON Greaseable CV centering yoke
• (1) 3-26-757 ...Dana Spicer 1350 H-Yoke
• (2) 5-1350X ...Dana Spicer 1350 NON Greaseable universal Joints
• (1) 2-86-418 ...Dana Spicer Rubber Boot

DIMENSIONS

• Bolt Circle.... 4.25 inches measured diagonally
• Pilot Diameter... 2 inches
  
• Fits universal joint 3.625 inches cap to cap (3 5/8 inches)
• Fits u-joint bearing cap diameter 1.188 inches (1 3/16 inches)