Neapco N2-3-7260KX Slip Yoke 1.375 x 16 spline fits Dodge 7260 series universal joint

NEAPCO N2-3-7260KX

7260 series Driveshaft Slip Yoke

Fits Dodge 7260 series universal joint

• 1.375 x 16 splines
• 6.88 inches from center of u-joint bearing cap to end of yoke with seal removed
  
• 2.125 inches between yoke inner surfaces where "C" clips lock u-joint in place
• 1.078 inch bore for universal joint bearing cap
• Inside "C" clip style
• Comes with 280194 press on seal for smooth shank splines
  
  • See optional 280195 seal for full length splines
• Fits 16 spline driveshaft with 1.375 spline Diameter
  • For proper fit be sure to Measure OUTSIDE DIAMETER of SPLINED SHAFT
  • 

• Includes press on seal
• 6.88 inches from center of u-joint bearing cap to end of yoke with seal removed. 
  • Measure from CENTER of Bearing Cap Hole to END of Yoke with seal removed
  •