NEAPCO 2-0291 Combination Universal Joint for 1949-1959 Ford Wing Style Rear yoke to connect to 1310 series driveshaft
2-0291
NEAPCO 2-0291
Outside snap ring to Wing style conversion u-joint
- 1310 Series to 1949-1959 Ford Wing Style Combination Universal Joint.
- Greaseable
Limited Supply: only 2 remaining
Pricing:
$77.09
Description
NEAPCO 2-0291
Outside snap ring to Wing style conversion u-joint
- 1310 Series to 1949-1959 Ford Wing Style Combination Universal Joint.
- Greaseable
This is a very handy u-joint when connecting a newer 1310 series driveshaft to a stock 1949-1959 Ford Wing Style pinion Flange.
This is what you need when you upgrade the engine and transmission to a newer more modern driveline while keeping the stock rear end.
- GREASEABLE U-Joint
- 1310 series
- G = 3.219 inches (3 7/32) wide across bearing caps
- D = 2 bearing caps are 1.062 inch (1 1/16) diameter
- Designed for Outside snap ring style 1310 series driveshaft yokes
-
- WING STYLE
- C = 3.125 inches (3 1/8) pilot diameter...this is the distance between the raised shoulders on pinion flange that centers the u-joint.
- LWT wing style 2 bearing caps with threaded holes
- S = 1.312 inches between threaded bolt holes on bearing cap
- Designed for original equipment Ford 1949-1959 Wing Style Pinion Flange
PLEASE NOTE: This u-joint will not fit the original stock driveshaft. It is designed to fit a newer 1310 series driveshaft ONLY
Details
- 2-0291
- 2-0291
- Neapco
- Available
- New
Categories
Shipping Information
- Item Requires Shipping
- 2.0 lbs.
- W6.0000” x H5.0000” x L2.0000”