NEAPCO N3-3-488KX Slip Yoke 1350 series 1.5 X 16 spline 7.312 inches

NEAPCO N3-3-488KX

1350 series Slip Yoke

Fits Front or Rear Spline and Slip Style Driveshaft

It will fit in place of the original slip yoke on any 16 spline driveshaft with a spline diameter of 1.5 inches

Designed for 1350 series u-joint.  See bottom of this page for 1350 series u-joints

• 3 5/8 inches between snap rings
• 1 3/16 diameter bearing caps

16 splines and 1.5 inch Spline Diameter

• Fits 16 spline driveshaft with 1.5 spline Diameter
  • For proper fit be sure to Measure OUTSIDE DIAMETER of SPLINED SHAFT
  • 
• Includes SCREW on seal
• 7.312 inches from center of u-joint bearing cap to end of yoke with seal removed. 
  • Measure from CENTER of Bearing Cap Hole to END of Yoke with seal removed
  •