DANA SPICER 2-86-418 Rubber Boot fits Jeep with OEM Non Greaseable CV Centering Yoke on 1310 and 1330 series CV Driveshafts front/rear

DANA SPICER 2-86-418

Rubber Boot

• Fits all Jeep models CJ, Wrangler, Cherokee and others with OEM or aftermarket Non Greaseable 1310 CV Driveshafts front/rear
  • See Dana Spicer 211544X
• Fits all Jeep Rubicon 2003 to 2006 with OEM or aftermarket Non Greaseable 1330 Front CV Driveshafts
  • See Dana Spicer 211996X

• Rubber Boot should always be replaced when repairing or rebuilding a Non Greaseable 1310 or 1330 Double Cardan CV Driveshaft
• Rubber Boot has metal reinforced collar to press firmly onto driveshaft CV stud yoke

TIP: Remember to look for and remove the old metal ring from the old rubber boot. Look closely to see if it is still on the CV Stud Yoke. If it is, you can easily remove it with a screwdriver and a small hammer. A small tap with the hammer and the old metal ring should come right off.

TIP: To make the job easier you may want Denny's Part Number DE-15688 Installation Tool. See bottom of this page.