2.125 x .188 DOM DRIVESHAFT TUBING - 24 INCH LENGTH - Counterbored to 1.845 ID at one end to fit 53-2415M1 sleeve
|
Part Number: 2125-188-24CB
|
Your Cost
$96.80
Sorry, sold out
STATUS:
Not available at this time
|
|
2125-188-24CB
DRIVESHAFT TUBING - DOM
2.125 x .188 wall HD tubing
- 24 INCH LENGTH - Counterbored to 1.845 inch ID at one end to fit 53-2415M1 sleeve
- Opposite end ID must be counterbored to fit all splines, weld yokes and cv stud yokes made for 2 inch x .120 wall
- Actual butt diameter of 2.0 x .120 weld yoke, spline or stud yoke is 1.771
- Your tube counterbore should be approximately 1.765 for tight press fit.
- 2.125 INCH OUTSIDE DIAMETER (2 1/8 inch)
- .188 WALL THICKNESS (3/16 inch)
- DOM - Drawn over mandrel
- ASTM A513
Great choice for applications requiring additional torsional strength.
Also resists dents from rocks.
UPC:
Part Number: 2125-188-24CB
|
2.125 x .188 DOM DRIVESHAFT TUBING - 24 INCH LENGTH - Counterbored to 1.845 ID at one end to fit 53-2415M1 sleeve
|
FOR FASTER SERVICE, PLEASE ORDER ALL PARTS ONLINE
STATUS: Not available at this time
YOUR COST:
$96.80
OVERSIZE PACKAGE: Sorry ... this item DOES NOT qualify for Free Shipping!
|
2125-188-24CB
DRIVESHAFT TUBING - DOM
2.125 x .188 wall HD tubing
- 24 INCH LENGTH - Counterbored to 1.845 inch ID at one end to fit 53-2415M1 sleeve
- Opposite end ID must be counterbored to fit all splines, weld yokes and cv stud yokes made for 2 inch x .120 wall
- Actual butt diameter of 2.0 x .120 weld yoke, spline or stud yoke is 1.771
- Your tube counterbore should be approximately 1.765 for tight press fit.
- 2.125 INCH OUTSIDE DIAMETER (2 1/8 inch)
- .188 WALL THICKNESS (3/16 inch)
- DOM - Drawn over mandrel
- ASTM A513
Great choice for applications requiring additional torsional strength.
Also resists dents from rocks.
PLEASE NOTE: When purchasing more than one piece of tubing you should always CALL in your order so we can quote the shipping cost correctly. Ordering online may show a higher inaccurate cost for multiple piece orders.
|
2.125 x .188 DOM DRIVESHAFT TUBING - 24 INCH LENGTH - Counterbored to 1.845 ID at one end to fit 53-2415M1 sleeve
|
|
You May Also Need These Parts to Complete the Job
$138.55
|
|
|