1330CV-3FL Ford BRONCO 1990 to 1996 CV Driveshaft with 3 inch tube diameter custom built to fit REAR with up to 4 inch lift

Part Number: 1330CV-3FL

Double Cardan 1330 series 3 inch REAR CV Driveshaft

• Custom built to fit your FORD BRONCO
  • 1990, 1991, 1992, 1993, 1994, 1995, 1996
• Easily handle up to a 4 inch lift.
• HIGH SPEED/HIGH RPM Balanced for smooth operation on or off the highway

FEATURES

• Large 3 inch .083 wall DOM High Strength Steel Tube
  • As with all Denny's 4X4 Driveshafts... "IF YOU CAN POSSIBLY TWIST OUR 4x4 TUBING OR BREAK OUR WELDS...WE'LL REPLACE IT FREE"  
•     Proudly Built with DANA SPICER parts
  • 1330 Series Double Cardan CV with SPICER 211631X NON greaseable centering yoke
  • 1330 Series Greaseable SPICER Spline and SPICER Slip Yoke - total of 4 inches of slip travel
    • 1.375 x 16 SPICER GlideCoated (blue coating) spline with smooth shank allows seal on slip yoke to keep the water and mud out.  
  • 1330 Series SPICER 5-213X Greaseable Universal Joints
  • 1330 Series flange yoke to mount to 8.8 inch rear with flat round mounting
  • HIGH SPEED/HIGH RPM Balanced for smooth operation on or off the highway
• 
  • Denny's Free Lifetime Labor means if you ever need it shortened, re-balanced, rebuild the CV, replace the spline, change u-joints....the Labor is FREE    
    • Please see our Free Lifetime Labor page for details. CLICK HERE
      
• MEASUREMENTS ARE REQUIRED
  
  •  Please use our DIAGRAM "H" to measure correctly.   CLICK HERE to view and PRINT Diagram "H"
  • 

OVERSIZE PACKAGE: Sorry ... this item DOES NOT qualify for Free Shipping!