UPGRADE MW 39031 Chromoly Slip Yoke necessary for 26 spline Mopar 904 transmission on Denny's 1350 Aluminum Driveshafts

UPGRD-39031

UPGRADE to MW 39031 Slip Yoke

• Upgrade to the Mark Williams Enterprises 39031 Chromoly Slip Yoke 1350 Series nessary for Mopar 904 Transmissions with 26 splines for use on the following Aluminum Driveshafts ONLY:
  • For Denny's 3.5 inch 1350 Aluminum Driveshaft
  • For Denny's 4.0 inch 1350 Aluminum Driveshaft
    

1350 Series Forged 4340 Chromoly Transmission Slip Yoke fits Mopar 904 transmissions with 26 spline rear output

NOTE: This is an UPGRADE.  This is not a part to be ordered separately. 

This UPGRADE MUST be ordered along with one of the driveshafts listed.

Dimensions

• Length to center of u-joint... Dimension #1 =  6.125  inches
• Barrel Diameter... Dimension #2 = 1.558 inches
• Barrel Length... Dimension #3 =  4.125 inches
• U-joint cap diameter... Dimension #4 = 1.188 inches
• U-joint width... Dimension #5 = 3.625 inches
• Series... 1350
• Spline count... 26