NEAPCO N2-3-9165KX Driveshaft Slip Yoke 1310 series 1.375 - 31 based on 32 splines 7.38 inches

NEAPCO N2-3-9165KX

1310 series Slip Yoke

• Fits Front or Rear Spline and Slip Style Driveshaft
• 31 based on 32 splines ( one wide spline for alignment )
• 1.375 inch Spline Diameter
• 7.38 inches from center of u-joint bearing cap to end of yoke with seal removed.

Designed for 1310 series u-joint.  See bottom of this page for 1310 series u-joints

• 3 7/32 inches between snap rings
• 1 1/16 diameter bearing caps

• For proper fit be sure to Measure OUTSIDE DIAMETER of SPLINED SHAFT
• 
• Includes Screw on seal
• 7.38 inches from center of u-joint bearing cap to end of yoke with seal removed. 
  • Measure from CENTER of Bearing Cap Hole to END of Yoke with seal removed
  •