NEAPCO N2-3-7981KX Driveshaft Slip Yoke 1310 series 16 spline 6.0 inch
N2-3-7981KX
NEAPCO N2-3-7981KX
1310 series Slip Yoke
Fits Jeep Front or Rear Spline and Slip Style Driveshaft
- Use this slip yoke to upgrade to 1310 series and retain your existing driveshaft. It will fit in place of the original slip yoke on any 16 spline driveshaft with a spline diameter of 1.375 inches
- 16 splines and 1.375 inch Spline Diameter
- 6.0 inches from center of u-joint bearing cap to end of yoke with seal removed.
Limited Supply: only 4 remaining
Pricing:
$82.00
Description
NEAPCO N2-3-7981KX
1310 series Slip Yoke
Fits Jeep Front or Rear Spline and Slip Style Driveshaft
Use this slip yoke to upgrade to 1310 series and retain your existing driveshaft. It will fit in place of the original slip yoke on any 16 spline driveshaft with a spline diameter of 1.375 inches
Designed for 1310 series u-joint. See bottom of this page for 1310 series u-joints
- 3 7/32 inches between snap rings
- 1 1/16 diameter bearing caps
16 splines and 1.375 inch Spline Diameter
- Fits 16 spline driveshaft with 1.375 spline Diameter
- For proper fit be sure to Measure OUTSIDE DIAMETER of SPLINED SHAFT
- Includes press on seal
- 6.0 inches from center of u-joint bearing cap to end of yoke with seal removed.
- Measure from CENTER of Bearing Cap Hole to END of Yoke with seal removed
Details
- N2-3-7981KX
- N2-3-7981KX
- Neapco
- Available
- New
Shipping Information
- Item Requires Shipping
- 4.0 lbs.
- W6.0000” x H5.0000” x L8.0000”