Dana Spicer 3-3-508KX Slip Yoke 1410 series 1.500 x 16 spline 7.812 inches

DANA SPICER 3-3-508KX

1410 series Slip Yoke

Fits Spline and Slip Style Driveshaft

It will fit in place of the original slip yoke on any 16 spline driveshaft with a spline diameter of 1.5 inches

Designed for 1410 series u-joint.  See bottom of this page for 1410 series u-joints

• 4 3/16 inches between snap rings
• 1 3/16 diameter bearing caps

16 splines and 1.5 inch Spline Diameter

• Fits 16 spline driveshaft with 1.5 spline Diameter
  • For proper fit be sure to Measure OUTSIDE DIAMETER of SPLINED SHAFT
  • 
• Includes SCREW on seal
• 7.812 inches from center of u-joint bearing cap to end of yoke with seal removed. 
  • Measure from CENTER of Bearing Cap Hole to END of Yoke with seal removed
  • 

SAME AS - ALTERNATE

• Neapco N3-3-508KX