1310CV-2 Ford BRONCO 1966 to 1977 CV Driveshaft with 2 inch tube diameter custom built to fit FRONT or REAR with up to 4 inch lift

Part Number: 1310CV-2

Double Cardan 1310 series 2 inch CV Driveshaft - Use on FRONT or REAR

• Custom built to fit your FORD BRONCO
  • 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977
• Easily handle up to a 4 inch lift.
• HIGH SPEED/HIGH RPM Balanced for smooth operation on or off the highway

FEATURES

• 2 inch .120 wall thickness DOM High Strength Steel Tube
  • As with all Denny's 4X4 Driveshafts... "IF YOU CAN POSSIBLY TWIST OUR 4x4 TUBING OR BREAK OUR WELDS...WE'LL REPLACE IT FREE"  
•     Proudly Built with DANA SPICER parts
  • 1310 Series Double Cardan CV with SPICER 211355X greaseable centering yoke
  • 1310 Series Greaseable SPICER Spline and SPICER Slip Yoke - total of 3 inches of slip travel
    • 1.375 x 16 SPICER GlideCoated (blue coating) spline with smooth shank allows seal on slip yoke to keep the water and mud out.  
  • 1310 Series SPICER 5-153X Greaseable Universal Joints
  • HIGH SPEED/HIGH RPM Balanced for smooth operation on or off the highway
  • Comes with (4) 5/16 inch Grade 8 CV Mounting Bolts
• 
  • Denny's Free Lifetime Labor means if you ever need it shortened, re-balanced, rebuild the CV, replace the spline, change u-joints....the Labor is FREE    
    • Please see our Free Lifetime Labor page for details. CLICK HERE
      
• MEASUREMENTS ARE REQUIRED
  
  •  Please use our DIAGRAM "G" to measure correctly.   CLICK HERE to view and PRINT Diagram "G"

OVERSIZE PACKAGE: Sorry ... this item DOES NOT qualify for Free Shipping!