Dana Spicer 2-4-5441 CV YOKE 1330 Series 32 Spline for NP 203 205 208 241 Transfer Case - OBSOLETE NO LONGER AVAILABLE

DANA SPICER 2-4-5441

1330 Series NP203 NP205 NP208 Transfer Case 32 spline CV style yoke

Use this 1330 series CV Yoke to replace your original equipment NON CV yoke when installing a 1330 Series CV Driveshaft onto any fixed yoke style New Process Transfer Case with a 32 spline output

• 32 spline
• 1.875 seal diameter
  • This yoke will require a new rear output seal. Please see the bottom of this page for our CV Yoke Replacement Seals 
• 1330 Series is 3 5/8 between tabs with 1.062 bearing cap diameter
• Requires 1 1/8 inch Socket Head Nut.   See listing at bottom of page.
  • This yoke may require the purchase of a new nut to replace original.  To be sure if you will need the new nut please check your original nut and if you need a socket larger than 1 1/8 inch to remove your original nut then you will need the new nut.  Please see the bottom of this page for CV Yoke Replacement Nut. 
• Requires 4 CV Bolts to connect 1330 CV Driveshaft to this yoke.  See listing at bottom of page
• SPLINE OD = 1.401
• D = 1.062
• E = 3.625
  
• Q = 2.000
  
• R = 1.875
  
• S = 3.875

OBSOLETE NO LONGER AVAILABLE