NEAPCO 5361 Increasing BUSHING - 2.5 inch to 3 inch

NEAPCO 5361

• INCREASING BUSHING for Driveshafts - 2.5 inch to 3 inch
• Use to install any driveshaft weld yoke, stud yoke or spline designed for 2.5 inch OD tubing into a 3.0 inch OD tubing.

NOTE: These NEAPCO driveshaft bushings are designed to fit many different sizes and may require machining to make the BUTT DIAMETER and ID fit your exact part and tube dimensions.

• Inside Diameter = 2.281 inches
  • ID can be machined to fit the following size weld yoke, stud yoke or spline
    
    • 2.5 x .065 = 2.381 inches
    • 2.5 x .083 = 2.345 inches
    • 2.5 x .095 = 2.321 inches
      
• Outside Diameter = approximately 3.0 inches at widest point of shoulder
• Length = .875 inches
• Butt Diameter = 2.881 inches
  • Will fit 3 x .065 Tubing without any further machining
    
  • Butt Diameter can be machined to fit the following size tubing
    
    • 3.0 x .083 = 2.845 inches
    • 3.0 x .095 = 2.821 inches