S1875-2 Rear output seal 1971-1979 NP 205 for CV Yoke 3.066 OD with 1.875 ID
S1875-2
S1875-2
Rear output seal
1971-1979 NP205 Transfer case
Use to install 1310 or 1330 CV Yoke.
- 3.062 outside Diameter of seal
- 1.875 inside Diameter of seal
Limited Supply: only 8 remaining
Shipping: Top quality Factory Fresh, Factory Boxed Genuine TIMKEN Parts at Denny's Driveshafts
Pricing:
$16.95
Description
S1875-2
Rear output seal
Use this Seal when installing a 1310 or a 1330 series CV Yoke onto the rear output of a 1971-1979 NP205 Transfer case.
- To be sure this is the correct seal please check the following info before purchasing.
- Be sure your rear output tailshaft housing on your NP205 transfer case was designed for a seal diameter of 3.062 (3 1/16 inches)
- If 3.062 is correct then this seal will work to install any 1310 or 1330 CV yoke with a seal hub diameter of 1.875 (1 7/8 inches)
Details
- S1875-2
- S1875-2
- Timken
- Available
- New
Categories
Shipping Information
- Item Requires Shipping
- 0.3 lbs.
- W4.0000” x H4.0000” x L1.0000”
- Top quality Factory Fresh, Factory Boxed Genuine TIMKEN Parts at Denny's Driveshafts