NEAPCO N3R-3-9165KX Driveshaft Slip Yoke GM 3R series 1.375 - 31 based on 32 splines 7.38 inches

NEAPCO N3R-3-9165KX

GM 3R series Slip Yoke

• Fits Front or Rear Spline and Slip Style Driveshaft
• 31 based on 32 splines ( one wide spline for alignment )
• 1.375 inch Spline Diameter
• 7.38 inches from center of u-joint bearing cap to end of yoke with seal removed.

• 2.562 inches between inner surfaces where "c" clips touch
• 1 1/8 diameter bearing caps
• Replaces OEM slip yoke where OEM u-joint was held in place by injected plastic

• For proper fit be sure to Measure OUTSIDE DIAMETER of SPLINED SHAFT
• 
• Includes Screw on seal
• 7.375 inches from center of u-joint bearing cap to end of yoke with seal removed. 
  • Measure from CENTER of Bearing Cap Hole to END of Yoke with seal removed
  •