Neapco N2-2-1369 FLANGE YOKE 1330 series fits Ford 8.8 inch Rear Ends LARGE BOLT PATTERN Replaces Ford OEM E9TZ4782B
NEAPCO N2-2-1369
Replaces Dana Spicer 2-2-1369
Replaces Ford OEM E9TZ4782B
1330 Series Ford Flange Yoke to fit Ford 8.8 inch rear ends with Large Bolt Pattern.
Designed for the LARGE Ford bolt pattern typically found on Full Size Ford Cars, Light Trucks and Cobra Mustang 8.8 rear ends.
Use this flange yoke to connect your 1330 series Jeep Rear Driveshaft to any Ford 8.8 inch rear end with large bolt pattern.
Description
NEAPCO N2-2-1369
Replaces Dana Spicer 2-2-1369
Replaces Ford OEM E9TZ4782B
1330 Series Ford Flange Yoke to fit Ford 8.8 inch rear ends with Large Bolt Pattern. Use this flange yoke to connect your 1310 series Jeep Rear Driveshaft to any Ford 8.8 inch rear end with large bolt pattern.
Designed for the LARGE Ford bolt pattern typically found on Full Size Ford Cars, Light Trucks and Cobra Mustang 8.8 rear ends.
- X = 3 inches
- Y = 3 inches
- C = Center Pilot Hole Diameter is 2.0 inches
- 1330 series
- 3.625 between snap rings (3 5/8 inches)
- D = 1.062 bearing cap diameter (1 1/16 inches)
| Flange Yokes - Flange Yokes | Model/Part #: N2-2-1369 |
| A.) Flange or Swing Dia. | 5.250 |
| B) Bolt Circle Dia. | 4.250 |
| Bolt Hole Dia. (NOM) | .500-D |
| Number of Bolt Holes | 4 |
| C) Pilot Dia. M=male F=female | 2.000-F |
| G) Flange Face to C/L | 1.625 |
Details
- N2-2-1369
- N2-2-1369
- Neapco
- Available
- New
Categories
Shipping Information
- Item Requires Shipping
- 2.1 lbs.
- W6.0000” x H5.0000” x L2.0000”