1350 to 7290 series Combination Universal Joints

• To connect 1350 series driveshafts or driveline components to 7290 series driveshafts or driveline components. 
  • For example:
    • to connect a 1350 slip yoke to a 7290 driveshaft. 
    • to connect a 7290 driveshaft to a 1350 rear end pinion yoke
• 1350 series
  • 3.625 inches (3 5/8) wide across bearing caps
  • 2 bearing caps are 1.188 inch (1 3/16) diameter
  • Designed for Outside snap ring style driveshaft yokes and also Locating Tab style pinion yokes, transmission yokes and  transfer case yokes
• 7290 series
  • 2.625 inches (2 5/8) wide between the yoke inner surfaces where the "C" Clips lock in.   Approximate overall width cap to cap is 3 5/8 inches
  • 2 bearing caps are 1.125 (1 1/8) inch diameter
  • Designed for INSIDE "C" Clip style driveshaft yokes and also NON Locating Tab style pinion yokes, transmission yokes and  transfer case yokes

CLICK on the selections below for more details

DON'T FORGET THE GREASE....CLICK HERE for the BEST Grease available to keep your driveline parts running like new.