Corvette Transmission Slip Yokes
Denny's Driveshafts offer a variety of Chevrolet Corvette Driveshafts and Slip Yokes for the C1, C2, C3 and C4. The typical Corvette driveshaft utilizes a detachable design slip yoke that allows for it to be disconnected from the driveshaft to allow for removal of the driveshaft from the car. The tight frame to floor space is why this is necessary. The newer Corvette with the aluminum driveshafts do not need this type as there is ample clearance for removal. Please note that the 1330 series 27 spline Corvette detachable slip yoke is not available. However, the 1310 series is available and can be attached to a 1330 series original driveshaft with the use of a combination 1310 to 1330 series u-joint. Please measure your u-joint width before ordering. The 1310 u-joint will measure 3.219 wide and the 1330 will measure 3.625 wide.
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
