- Home »
- Catalog »
- Driveline Parts »
- Universal Joints »
- COMBINATION-CONVERSION U-Joints »
- All with 4.188 x 1.188 outside snap rings on one side »
- Combo U-Joint DODGE 5380 to 1410 series 3.000 INSIDE to 4.188 OUTSIDE
Dennys Driveshafts and Driveline Parts - Combo U-Joint DODGE 5380 to 1410 series 3.000 INSIDE to 4.188 OUTSIDE
5380 to 1410 series Combination Universal Joints
- To connect 5380 series DODGE driveshafts or driveline components to 1410 series driveshafts or driveline components.
- For example:
- to connect a 5380 yoke to a 1410 driveshaft.
- For example:
- 1410 series
- 4.187 inches (4 3/16) wide across bearing caps
- 2 bearing caps are 1.188 inch (1 3/16) diameter
- Designed for Outside snap ring style driveshaft yokes and also Locating Tab style pinion yokes, transmission yokes and transfer case yokes
- 5380 series
- 3 inches wide between the yoke inner surfaces where the "C" Clips lock in. Approximate overall width cap to cap is 4 1/16 inches
- 2 bearing caps are 1.232 inch diameter
- Designed for INSIDE snap ring style driveshaft yokes and also NON Locating Tab style pinion yokes, transmission yokes and transfer case yokes
DON'T FORGET THE GREASE....CLICK HERE for the BEST Grease available to keep your driveline parts running like new.
CLICK on the selections below for more details
