- Home »
- Catalog »
- Driveline Parts »
- AXLES and REAR DIFF Parts »
- FORD REAR ENDS »
- FORD 9 inch »
- BEARINGS and SEALS »
- MASTER BEARING KIT
Dennys Driveshafts and Driveline Parts - MASTER BEARING KIT
***Ford 9 inch differential carrier bearings come in a few different ID and OD dimensions to match the particular carrier or spool that you are using.
***They also have 2 different size pinion bearing configurations for the Small and Large bearing pinion supports
If your carrier has the small 1.625 bearing hub and the bearing race is 2.89 OD then you should use the following MASTER BEARING KIT:
- DDS-F9MBK28
- Use with stock SMALL bearing pinion support (both pinion bearings are the same size)
If your carrier has the 1.781 bearing hub and the bearing race is 2.89 OD then you should use the following MASTER BEARING KIT:
- DDS-F9MBK31
- Use with stock SMALL bearing pinion support (both pinion bearings are the same size)
If your carrier has the 1.781 bearing hub and the bearing race is 3.062 OD then you should use the following MASTER BEARING KIT:
- DRK-313CMK
- Use with stock SMALL bearing pinion support (both pinion bearings are the same size)
If your carrier has the 1.781 bearing hub and the bearing race is 3.062 OD then you should use the following MASTER BEARING KIT:
- DRK-313AMK
- Use with LARGE bearing pinion support (Daytona) ...Pinion Inner Bearing HM89443 is larger than the Outer Bearing M88048
If your carrier has the large 2.000 bearing hub and the bearing race is 3.250 OD then you should use the following MASTER BEARING KIT:
*Typically Aftermarket Heavy Duty 35 spline and larger axles
- DRK-313BMK
- Use with most LARGE bearing pinion support (Daytona) ...Pinion Inner Bearing HM89443 is larger than the Outer Bearing M88048