Dennys Driveshafts and Driveline Parts - Combo U-Joint 1330 to DODGE 7260 series 3.625 OUTSIDE to 2.125 INSIDE

1330 to 7260 series Combination Universal Joints

To connect 1330 series driveshafts or driveline components to 7260 series driveshafts or driveline components.
- For example:
  - to connect a 1330 slip yoke to a 7260 driveshaft.
  - to connect a 7260 driveshaft to a 1330 rear end pinion yoke
1330 series
- 3.625 inches (3 5/8) wide across bearing caps
- 2 bearing caps are 1.062 inch (1 1/16) diameter
- Designed for Outside snap ring style driveshaft yokes and also Locating Tab style pinion yokes, transmission yokes and transfer case yokes
7260 series
- 2.125 inches (2 1/8) wide between the yoke inner surfaces where the "C" Clips lock in. Approximate overall width cap to cap is 3 1/4 inches
- 2 bearing caps are 1.078 inch diameter
- Designed for INSIDE "C" Clip style driveshaft yokes and also NON Locating Tab style pinion yokes, transmission yokes and transfer case yokes

CLICK on the selections below for more details