DennysDriveshaft.com
Free Shipping on Orders Over $99.00

Product Search
Denny's Driveshaft builds custom steel and aluminum driveshafts for your high performance car, street rod, race car, van, pick up or 4x4 truck
 

You've come to the right place for a driveshaft

Denny's Driveshafts - Customer Testimonials


Write your testimonial for Denny's Driveshafts, and we'll share it with other website visitors.


Received my driveshaft today 52209. Thank you so much for getting it to me before I leave to do the HotRod Power Tour. I will tell everyone about the great service I got from Denny's.

Thank You again Ken Pagel

Ken P, Walworth, WI, May 22nd, 2009

Thanks so much, you fixed the high speed vibration I had in my 1966 mustang fastback, 347 stroker, TKO 600 5-speed, 9 inch locker rear with 3.89 gears with 18 inch shelby rims.. This car now runs smooth at any speed....I have tried 3 different shafts!! Yours is the only one that got rid of the buzzing high speed vibration.. Thanks again.. I will be using your shafts on all my rebuilds from now on!!!!

John C, Proctorville, OH, Apr 24th, 2009

I just wanted to let you know that I received my new heavy duty driveshaft today and it is a perfect fit! It is installed in my 1966 Mustang fastback that has been modified with a 9" rear and TKO600 transmission. I upgraded the rear yoke to a 1330 u-joint when I placed my order. I was a little concerned that with all of these changes, it would be tough to get a good fit. A foolish concern on my part and why this is the fifth driveshaft I have ordered from you with every one a perfect fit. Thanks so much for your quality and professionalism. It means a lot in this day and age! Mark Reid

Mark R, CT, Mar 3rd, 2009

Driveshaft on my Coronet...perfectly balanced, nice job !
Thanks for your great communications and your product!
I'll be back...
Thanks from FRANCE!!
Jean.

Jean B, France, Feb 24th, 2009

I have had a Denny's Driveshaft in my Cobra Kit Car for over a year now and have not had any problems. It handles all the HP I can give it!!!

Michael W, Yates City, IL, Feb 14th, 2009

Denny
I'm very pleased with you and your company, I can't thank you enough for your service. I will forever tell everyone I 4 wheel with if they need to be hooked up to call you for one badass driveshaft and excellent customer service to boot. Thank you again for all you've done!!
Clint Bridge

Clint B, CT, Jan 5th, 2009

I received the 727 slip yoke by UPS this morning in good condition and prompt. Thanks for accomodating my business.

Wayne K, Chappell, NE, Dec 22nd, 2008

Hi Denny!....got the shafts today....what a work of art!...it will be hard to put them on the car so instead I will put them in a glass case and show them off!...but I do need to make the car go so I guess I will install them....really beautiful and high quality work!....thanx so much as you really solved a big problem for me....thanx again......GEORGE

George S, Dec 4th, 2008

Thanks so much for the outstanding half-shafts that I ordered for my 1994 Corvette a couple months ago. I admire the craftsmanship of your products. Being stationed in Germany, it's great to be able to order and receive American made components. My vette now has 124,000 miles! A Denny's driveshaft would complete my drivetrain and ensure many more worry-free driving miles. Thanks, again.

Richard B, Oct 20th, 2008

Thanks Dennys for your fast turnaround on my driveshaft, after going from a turbo350 to a 400 your work is flawless,you've got a customer for life

paul w, niagara falls, NY, Oct 5th, 2008

Denny,
I can't tell you how knocked out I am over winning one of your Heavy Duty Driveshafts! It took a couple of rereads for it to sink in that I had really won! Your diagram page on how to determine the correct measurements for ordering has got to be the best thing going.
I had seen one of your driveshafts on a race car and I'm really excited to be getting one to install on my T-Bucket.
Thanks Again,
Dale P.
McAllen, Texas

Dale P, McAllen, TX, Sep 18th, 2008

Thanks to Denny himself my car is now a little lighter and much quicker off the line. I also want to mention that talking directly with him helps you to understand what exactly is needed to help your car go fast. He is very easy to talk to and he makes you feel very comfortable about purchasing a driveshaft.

Jeichael H, Sep 9th, 2008

Hi Denny... Just wanted you to know I won the Mopar Nationals Q16 at Columbus Ohio last weekend using your 3-4 year old alum driveshaft. Will send better photos to you as soon as I get them... Your stuff is the best.... Love to see the car in an ad.

Bill S, MD, Aug 19th, 2008

Hi
I just would like to tell tell you that the parts I ordered from you, arrived Friday at my door. The axles looked just fine and I couldn't wait mounting them. So the "Vette" was on the road again Saturday at lunchtime. I am very pleased with your handling of my order. So thank you very much. Before I found you on the Internet, I tried to get these parts from 2 different Am car companies here in Norway, but none of them could get it from their USA connections, even GM had 0 in stock. I don't think you mind that I tell them about your company. I will also inform about your Internet home site, in the "Forum" to my Amcar Club and Corvette Club here in Norway. :-)
Attaching 2 more pictures of the car. One of them showing the most common part of the car, that other drivers get a short look at. :-)
Thank you very much again.
Best regards
Gunnar
(You have to excuse my AmericanEnglish )

GUNNAR A, NORWAY, Aug 11th, 2008

Denny
Thank you so much for all your help! You've covered our butts on this one and we won't forget it! Thanks also for the great info on the two piece driveshaft, that's exactly what I need to write the script for that segment...I'll credit you of course, and we'll give you lots of air during the installation and description of the shaft you sent.
Sincerely
Kevin T.
HostTechnical Producer
TRUCKS!
RTM Productions
Franklin, TN

Kevin T, Jun 30th, 2008

We finally had a chance to test our Corvette. You guys did a good job. Launched full throttle and straight as an arrow. Thanks a lot.
Vincente C.
Santa Cruz
ARUBA

Vincente C, Apr 22nd, 2007

We received the 4X4 Driveshaft you had made for my son's 1990 Full-size Blazer last week. This vehicle runs 33x12.5-15 tires without a lift, but has been a destroyer of standard u-joints. My son's driving in the mud may have something to do with that. Once the rear u-joint broke in half and the whole drive shaft thrashed around and came out. Needless to say, the old shaft was never the same.

I was impressed with the excellent workmanship when we took the shaft out of the box, and we did the install yesterday. Everything went right in, including the new rear pinion yoke to accept the Spicer 1350s. In two hours we had it done, and on the road..

The new shaft was smooth as silk - my son thought the truck was supposed to vibrate going down the road. With the bullet-proof solid Spicers, hopefully it will stay that way.

Thanks Again,

John N

John N, Jun 30th, 2006

Denny and Staff,
Just a short note to tell you how impressed I am with every aspect of your operation. First, when I was researching what driveshaft company to go with you and your staff offered total support and technical expertise without pressure or hassle. You took the time to educate me on all the details and then gave me the time to make my decision. Going with your company for my driveshaft was one of the best decisions I have made for my 71 SS454 Chevelle.
The measurement sheets were "Marine Proof" which means even I couldn't screw it up. The price was equal to the rest of your competitors, and your services, quality and guarantee totally blow the competition away.
The email notification of shipment is a great service and is consistent with the overall dedication to customer service.
The packaging is fantastic. As soon as I saw the box, I knew the product would be top notch. And upon opening the box, I found that it was exactly what I had hoped it would be. It was hard to believe that it actually looked as good as the pictures on your website. The welds are awesome and the finish is as professional as it could be. I'm going to make alot of people lay down and look under the car for a while!!!
The performance of the driveshaft seems to be flawless. Your craftsmanship and high speed balancing have my drivetrain humming. I couldn't be happier.
Finally, I have to say Thanks Again for taking the time to carefully examine and replace the Spicer Yoke that came with my Gear Vendor. To go the extra mile like that really proves that your standards, attention to detail and professionalism are the best in the industry.
You can be sure that my one and only recommendation for driveshafts will be Denny's Driveshafts.
Oh, and thanks again for offering a discount to Team Chevelle members.
You and your staff have all the bases covered Denny.
It's great to do business with people and companies like you.
Sincerely, Bob McGuiness

Bob M, Slidell, LA, Mar 31st, 2005

I just wanted to email you and let you know I received the drivleline I ordered from you for my '77 Dodge pickup. Everything fit with a minimal of trouble and I am very happy with the results. The CV joint resolved my vibration problems and so far it has handled numerous occasions of using a little too much throttle. Thank you for the excellent product.
Jason M
1977 Dodge W100
408 small block
Dana 60 rear axle

Jason M, Nov 30th, 1999

Denny,
The driveshaft arrived in perfect shape. Wow, nice
job. I'll take pictures as it goes in and send you a
collections of images when I get this beast running
(I'm waiting for front fenders at the moment).
Thanks!
Rick D

Rick D, Nov 30th, 1999

Hi Denny,

Received the driveshaft yesterday - a perfect fit and NO MORE VIBRATION. After four years of discomfort you have cured the problem.

Very many thanks,

Tony M

Tony M, Nov 30th, 1999

I would like to say how satisfied I was talking to Denny himself on the phone. I find it very good for business that he takes the time to talk to someone he does not know on the phone. Thank you very much Denny
Marty J.

Marty J, Nov 30th, 1999

141-162 of 162 Matching Results Found
<< Previous  123  Next >>
Results per Page:
DennysDriveshaft.com - © Copyright 2019-Present

Website and Web Hosting by Online Media
Online Media - Buffalo's Web Hosting Company