DennysDriveshaft.com
Free Shipping on Orders Over $99.00

Product Search
Denny's Driveshaft builds custom steel and aluminum driveshafts for your high performance car, street rod, race car, van, pick up or 4x4 truck
 
2060662 Transmission Slip Yoke 1310 series 32 splines fits T-400, 4L80, 4L85 Light TRUCK Transmissions that originallly had a bolt on yoke at rear output
Part #:
2060662
Your Cost $75.95

2060662

1310 Series 32 spline T-400, 4L80, 4L85 Light TRUCK Transmission Slip yoke

  • Specifically designed to replace the factory bolt on yoke for T-400, 4L80, 4L85 Truck Transmissions with the Threaded Hole in the center of the Output shaft.
  • DOES NOT FIT.... T400/475 with the emergency brake and or roller bearing in the tailshaft housing as found in the RV Motor Home Transmission and Medium Truck Transmissions
    >>>> Please consult a transmission rebuilder to see what is required to convert it to a normal light truck tailshaft and tailshaft housing.

  • Replaces the light truck style bolt on yoke with a normal car style slip yoke which will allow for proper slip travel and bushing contact for best performance. A must have when using any T-400, 4L80 or 4L85 truck transmission with the threaded hole in the output shaft.

With this counterbored slip yoke you can now use a normal car style driveshaft.

This slip yoke will slide all the way into the transmission. 

  • To determine correct driveshaft center to center length for this slip yoke
    • Push the slip yoke all the way into transmission and pull it out 3/4 inch minimum to 1 inch maximum. Now measure from center of u-joint hole in slip yoke to the center of the u-joint at the rear end yoke.  This dimension will be the correct center to center required for your driveshaft to fit correctly using this slip yoke.

We designed this yoke to solve this problem over 30 years ago.

  • Barrel Diameter = 1.886 inches
  • Fits U-joint cap diameter = 1.062 inches
  • Fits U-joint width = 3.219 inches
  • Outside Snap Ring Style
  • Series = 1310
  • Spline count = 32
  • Counterbored

Neapco
2060662 Transmission Slip Yoke 1310 series 32 splines fits T-400, 4L80, 4L85 Light TRUCK Transmissions that originallly had a bolt on yoke at rear output
2060662 Transmission Slip Yoke 1310 series 32 splines fits T-400, 4L80, 4L85 Light TRUCK Transmissions that originallly had a bolt on yoke at rear output
FOR FASTER SERVICE, PLEASE ORDER ALL PARTS ONLINE
STATUS:  IN STOCK
YOUR COST:  $75.95

2060662

1310 Series 32 spline T-400, 4L80, 4L85 Light TRUCK Transmission Slip yoke

  • Specifically designed to replace the factory bolt on yoke for T-400, 4L80, 4L85 Truck Transmissions with the Threaded Hole in the center of the Output shaft.
  • DOES NOT FIT.... T400/475 with the emergency brake and or roller bearing in the tailshaft housing as found in the RV Motor Home Transmission and Medium Truck Transmissions
    >>>> Please consult a transmission rebuilder to see what is required to convert it to a normal light truck tailshaft and tailshaft housing.

  • Replaces the light truck style bolt on yoke with a normal car style slip yoke which will allow for proper slip travel and bushing contact for best performance. A must have when using any T-400, 4L80 or 4L85 truck transmission with the threaded hole in the output shaft.

With this counterbored slip yoke you can now use a normal car style driveshaft.

This slip yoke will slide all the way into the transmission. 

  • To determine correct driveshaft center to center length for this slip yoke
    • Push the slip yoke all the way into transmission and pull it out 3/4 inch minimum to 1 inch maximum. Now measure from center of u-joint hole in slip yoke to the center of the u-joint at the rear end yoke.  This dimension will be the correct center to center required for your driveshaft to fit correctly using this slip yoke.

We designed this yoke to solve this problem over 30 years ago.

  • Barrel Diameter = 1.886 inches
  • Fits U-joint cap diameter = 1.062 inches
  • Fits U-joint width = 3.219 inches
  • Outside Snap Ring Style
  • Series = 1310
  • Spline count = 32
  • Counterbored

 

2060662 Transmission Slip Yoke 1310 series 32 splines fits T-400, 4L80, 4L85 Light TRUCK Transmissions that originallly had a bolt on yoke at rear output

2060662 Transmission Slip Yoke 1310 series 32 splines fits T-400, 4L80, 4L85 Light TRUCK Transmissions that originallly had a bolt on yoke at rear output

Enter your email address and we'll send you a message when this item is available

Please enter your email address in order to be notified when this item is available.
DennysDriveshaft.com - © Copyright 2019-Present

Website and Web Hosting by Online Media
Online Media - Buffalo's Web Hosting Company