|
DANA SPICER 2-86-418 Rubber Boot for OEM Non Greaseable CV Centering Yoke
|
||||||
|
||||||
|
DANA SPICER 2-86-418 Rubber Boot for Double Cardan CV driveshafts. Use on NON Greaseable OEM 1310 & 1330 Series CV Driveshafts.
 |
||||||
DANA SPICER 2-86-418 Rubber Boot for OEM Non Greaseable CV Centering Yoke
|
FOR FASTER SERVICE, PLEASE ORDER ALL PARTS ONLINE
STATUS: SOLD OUT...More Coming Soon
YOUR COST:
$6.60
|
|||||
|
DANA SPICER 2-86-418
Rubber Boot for Double Cardan CV driveshafts. Use on NON Greaseable OEM 1310 & 1330 Series CV Driveshafts. Rubber boot is necessary to keep dirt away from center bearing.
|
||||||
|
||||||
You May Also Need These Parts to Complete the Job
|
||||||
TIP: Remember to look for and to remove the old metal ring from the old rubber boot. Look closely to see if it is still on the CV Stud Yoke. If it is you can easily remove it with a screw driver and a small hammer. A small tap with the hammer and the old metal ring should come right off. 
