Dana Spicer 212024XKT Double Cardan CV Head Assembly 1350 series KIT Greaseable u-joints fits FORD with 4.25 inch bolt circle and 2 inch pilot on front or rear transfer case flange

Part Number:
212024XKT

UPC:

Your Cost $202.95

STATUS: IN STOCK - FREE SHIPPING

Dana Spicer 212024XKT

Double Cardan CV KIT

Fits OEM and aftermarket 1350 series FRONT or REAR driveshafts that are built with a 1350 NON greaseable stud yoke.
- DOES NOT FIT any greaseable style 1350 series stud yokes
- DOES NOT FIT OEM Driveshaft with press on ball.
Fits Ford Bronco, F150, F250, F350 transfer case front or rear output flange with 2 inch pilot diameter
- NOTE: Some rear potput flanges had the 2.68 inch pilot diameter ...please check this before ordering
1350 Series NON Greaseable Center yoke
- 4 Mounting holes are threaded to accept OEM Ford bolts
- Needle Bearing Ball Socket fits 1/2 inch stud yoke

<<<<<<SCROLLDOWN to see photos for comparison

IMPORTANT: The "SPICER" name must be visible on your original H-Yoke and Flange yoke to use these replacement parts.

If you have a driveshaft that looks like the one in these photos then this cv kit will NOT work.

Please notice the shape of the mounting flange...if yours looks like the mounting flange in the photo on the left then this CV Kit will not fit.
Please notice the squared shape of the H-Yoke around the holes for the u-joint cap and snap ring in the photo on the right. ... If yours has the squared shape then this CV Kit will not fit.
If you have a driveshaft with a pressed on ball on the cv stud yoke then this cv kit will NOT work.

INCLUDES

(1) 212024X ...Dana Spicer 1350 NON Greaseable CV centering yoke
(1) 3-26-757 ...Dana Spicer 1350 H-Yoke
(2) 5-178X ...Dana Spicer 1350 Greaseable universal Joints
(1) 2-86-418 ...Dana Spicer Rubber Boot

DIMENSIONS

Bolt Circle.... 4.25 inches measured diagonally
Pilot Diameter... 2 inches
Fits universal joint 3.625 inches cap to cap (3 5/8 inches)
Fits u-joint bearing cap diameter 1.188 inches (1 3/16 inches)

Dana Spicer 212024XKT Double Cardan CV Head Assembly 1350 series KIT Greaseable u-joints fits FORD with 4.25 inch bolt circle and 2 inch pilot on front or rear transfer case flange

Click for Larger Photo

FOR FASTER SERVICE, PLEASE ORDER ALL PARTS ONLINE

STATUS: IN STOCK - FREE SHIPPING

YOUR COST: $202.95

FREE GROUND Shipping**

**Free Ground Shipping to lower 48 States ONLY...Alaska and Hawaii at reduced rates.

Dana Spicer 212024XKT

Double Cardan CV KIT

Fits OEM and aftermarket 1350 series FRONT or REAR driveshafts that are built with a 1350 NON greaseable stud yoke.
- DOES NOT FIT any greaseable style 1350 series stud yokes
- DOES NOT FIT OEM Driveshaft with press on ball.
Fits Ford Bronco, F150, F250, F350 transfer case front or rear output flange with 2 inch pilot diameter
- NOTE: Some rear potput flanges had the 2.68 inch pilot diameter ...please check this before ordering
1350 Series NON Greaseable Center yoke
- 4 Mounting holes are threaded to accept OEM Ford bolts
- Needle Bearing Ball Socket fits 1/2 inch stud yoke
1350 Series Dana Spicer gresaeable universal joints

INCLUDES

(1) 212024X ...Dana Spicer 1350 NON Greaseable CV centering yoke
(1) 3-26-757 ...Dana Spicer 1350 H-Yoke
(2) 5-178X ...Dana Spicer 1350 Greaseable universal Joints
(1) 2-86-418 ...Dana Spicer Rubber Boot

DIMENSIONS

Bolt Circle.... 4.25 inches measured diagonally
Pilot Diameter... 2 inches
Fits universal joint 3.625 inches cap to cap (3 5/8 inches)
Fits u-joint bearing cap diameter 1.188 inches (1 3/16 inches)

IMPORTANT: The "SPICER" name must be visible on your original H-Yoke and Flange yoke to use these replacement parts.

If you have a driveshaft that looks like the one in these photos then this cv kit will NOT work.

Please notice the shape of the mounting flange...if yours looks like the mounting flange in the photo on the left then this CV Kit will not fit.
Please notice the squared shape of the H-Yoke around the holes for the u-joint cap and snap ring in the photo on the right. ... If yours has the squared shape then this CV Kit will not fit.
If you have a driveshaft with a pressed on ball on the cv stud yoke then this cv kit will NOT work.

Dana Spicer 212024XKT Double Cardan CV Head Assembly 1350 series KIT Greaseable u-joints fits FORD with 4.25 inch bolt circle and 2 inch pilot on front or rear transfer case flange

You May Also Need These Parts to Complete the Job

42-1855 BOLT Set M12-1.75 for Ford 4x4 Transfer Case Flange - 12mm 12 point bolt set
Part#: 42-1855

$11.95

DE-15688 Installation Tool for use with Rubber Boot Part Number 2-86-418
Part#: DE-15688

$32.95

Enter your email address and we'll send you a message when this item is available

Please enter your email address in order to be notified when this item is available.

[ X ]

Driveshaft and Driveline Parts > CV PARTS DOUBLE CARDAN ALL > CV PARTS DOUBLE CARDAN - FORD > Centering Yokes Flat Flange Style > 1350 Series - 4.25 x 2 inch pilot

You May Also Need These Parts to Complete the Job

Enter your email address and we'll send you a message when this item is available