|
|
|
|
Driveshafts and Driveline |
|
|
|
|
|
|
|
|
|
|
Pinion Flange fits 8.8 inch Rear Ends Large Bolt Pattern
|
| Part #: Ford 8.8 Flange |
$39.95 each
|
|
Ford Pinion Flange to fit 8.8 inch rear ends. Designed for the LARGE Ford bolt pattern to accept 1310, 1330 and 1350 series Flange Yokes with large Ford bolt pattern. Bolt pattern is 3 inches by 3 inches when measured from center of bolt hole to center of next bolt hole.
|
|
Status: In Stock, Usually Shipped Within 2 Days
|
|
Ford Pinion Flange to fit 8.8 inch rear ends. Designed for the LARGE Ford bolt pattern to accept 1310, 1330 and 1350 series Flange Yokes with large Ford bolt pattern. Bolt pattern is 3 inches by 3 inches when measured from center of bolt hole to center of next bolt hole. Use this pinion flange to upgrade from the smaller Ford bolt pattern typically found on Mustangs to the larger Ford bolt pattern to use a 1350 series flange yoke. Flange has eight bolt holes equally spaced to mount driveshaft . Uses original equipment bolts to mount flange. |
|
|
Complementary Product Suggestions
$9.50
|
|
|
|
|
|
|
