FORD F8TZ4851BA Pinion Yoke 1350 Series fits 1993 to 2007 FORD F250, F350 Super Duty 10.25 inch and 10.50 inch Sterling rear ends

Part Number:
F8TZ4851BA

UPC:

Your Cost $164.95

Sorry, sold out

STATUS: DISCONTINUED ITEM

FORD F8TZ4851BA

Pinion Yoke for FORD Super Duty Rear End
- Fits Ford F250, F350 Super Duty Truck with 10.25 inch FORD Sterling Rear
  - 1993, 1994, 1995, 1996, 1997, 1998
- Fits Ford F250, F350 Super Duty Truck 10.50 inch FORD Sterling Rear
  - 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

FORD OEM Original Equipment Part made by AAM - American Axle Manufacturing

Same exact part sold by the Ford dealer

31 Splines 1.343 diameter
Strap and Bolt style
1350 Series - fits 1350 series universal joint 5-178X or 5-1350X
- E = Fits Universal joint 3.625 inches (3 5/8) wide cap to cap
- D = Fits u-joint bearing cap diameter 1.188 inch (1 3/16)
- Q = 1.640 inches through splined hole
- S = 3.5 inches tall
- R = 1.812 inches seal surface diameter

THIS Yoke is 3.5 inches (3 1/2) TALL

IMPORTANT: Early 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992 Ford 10.25 inch Sterling rear end pinion yokes could be 3.125 inches (3 1/8) tall. Please check yours to be sure before ordering.

CLICK HERE if you need the 3 1/8 inch yoke for 10.25 inch from 1983 to 1992

NOTES:

DOES NOT fit Ford Super duty with DANA rear end
NOT compatible with 1330 series driveshaft.
- Requires combination u-joint to make connection. CLICK HERE
NOT compatible with 1410 series driveshaft
- CLICK HERE for 1410 series Ford Sterling pinion yokes

FORD F8TZ4851BA Pinion Yoke 1350 Series fits 1993 to 2007 FORD F250, F350 Super Duty 10.25 inch and 10.50 inch Sterling rear ends

Click for Larger Photo

FOR FASTER SERVICE, PLEASE ORDER ALL PARTS ONLINE

STATUS: DISCONTINUED ITEM

YOUR COST: $164.95

FORD F8TZ4851BA

Pinion Yoke for FORD Super Duty Rear End
- Fits Ford F250, F350 Super Duty Truck with 10.25 inch FORD Sterling Rear
  - 1993, 1994, 1995, 1996, 1997, 1998
- Fits Ford F250, F350 Super Duty Truck 10.50 inch FORD Sterling Rear
  - 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007

FORD OEM Original Equipment Part made by AAM - American Axle Manufacturing

Same exact part sold by the Ford dealer

31 Splines 1.343 diameter
Strap and Bolt style
1350 Series - fits 1350 series universal joint 5-178X or 5-1350X
- E = Fits Universal joint 3.625 inches (3 5/8) wide cap to cap
- D = Fits u-joint bearing cap diameter 1.188 inch (1 3/16)
- Q = 1.640 inches through splined hole
- S = 3.5 inches tall
- R = 1.812 inches seal surface diameter

THIS Yoke is 3.5 inches (3 1/2) TALL

CLICK HERE if you need the 3 1/8 inch yoke for 10.25 inch from 1983 to 1992

NOTES:

DOES NOT fit Ford Super duty with DANA rear end
NOT compatible with 1330 series driveshaft.
- Requires combination u-joint to make connection. CLICK HERE
NOT compatible with 1410 series driveshaft
- CLICK HERE for 1410 series Ford Sterling pinion yokes

FORD F8TZ4851BA Pinion Yoke 1350 Series fits 1993 to 2007 FORD F250, F350 Super Duty 10.25 inch and 10.50 inch Sterling rear ends

You May Also Need These Parts to Complete the Job

Neapco 2-0053G universal joint 1350 Series non greaseable 3.622 x 1.188 Part#: 2-0053G ~~$24.55~~ $22.95	Dana Spicer 5-178X Greaseable u-joint 1350 Series Part#: 5-178X $20.20
Dana Spicer 5-1350X Universal Joint NON Greaseable 1350 series cold forged solid body heat treated precision ground and case hardened with multi lip seals Part#: 5-1350X $23.54

Enter your email address and we'll send you a message when this item is available

Please enter your email address in order to be notified when this item is available.

[ X ]

Driveshaft and Driveline Parts > PINION YOKES - Front and Rear End > Ford 10.25 and 10.50 STERLING > 1350 Series - 3.625 X 1.188

You May Also Need These Parts to Complete the Job

Enter your email address and we'll send you a message when this item is available