Denny's Driveshaft builds custom Steel and Aluminum driveshafts for your high performance car, street rod, race car, van, pick up or 4x4 truck.

$275.95 each

2 required per vehicle

1963-1979 Corvette C2 & C3 Rear Axle 3 inch Half Shaft complete with Spicer 1350 series maintenance free u-joints and flange yoke.  All Denny’s Corvette Axle Half Shafts are high speed balanced and come fully assembled for easy installation. No greasy mess splattered all over that nice Corvette from these u-joints and you can expect very high mileage with no maintenance.  Don’t get these confused with those inexpensive unbalanced no name shafts that seem to be all over the internet for a whole lot less.  Buy with confidence knowing that they are built with our Nitrous Ready tubing for the ultimate in strength and reliability.

$60.00 each

2 required per vehicle

1963-1979 Corvette 1350 Series Flange Yoke

Brand new Spicer flange yoke to replace your bent, rusted or damaged original.

$325.95 each

2 required per vehicle

1963-1979 Corvette C2 & C3 Rear Axle 3.5 inch 6061-T6 Aluminum Half Shaft complete with Spicer 1350 series maintenance free u-joints and flange yoke.  These are a larger 3.5 inch tube diameter and lighter than the the stock axle half shafts. Can be polished beautifully for that show car look. All Denny’s Corvette Axle Half Shafts are high speed balanced and come fully assembled for easy installation. No greasy mess splattered all over that nice Corvette from these u-joints and you can expect very high mileage with no maintenance. 

$275.95 each

2 required per vehicle

1984-1996 C4 Corvette Rear Axle 3.5 inch 6061-T6 Aluminum Half Shaft complete with Spicer 1350 series maintenance free u-joints. These are 3.5 inch tube diameter. Can be polished beautifully for that show car look. All Denny’s Corvette Axle Half Shafts are high speed balanced and come fully assembled for easy installation. No greasy mess splattered all over that nice Corvette from these u-joints and you can expect very high mileage with no maintenance.  

Please measure as shown below

$26.95 each

4 required per vehicle

1350 Series Spicer Maintenance Free u-joint for 1963-1996 Corvette axle half shafts.  These are super strong high mileage universal joints ready to install.  No greasy mess from these to splatter all over your meticulously restored car.

Select this button to Buy 2 U-joints

Select this button to Buy 4 U-joints

PHOTO Not Available

$20.95 each

4 required per vehicle

1350 Series Spicer Greaseable u-joint for 1963-1996 Corvette axle half shafts.  These are a greaseable strong high mileage universal joint ready to install. As with all greaseable universal joints these will require that you grease them with extreme pressure lubricant approximately every 3000 miles.

Select this button to Buy 2 U-joints

Select this button to Buy 4 U-joints

$305.95 Complete Driveshaft

Includes Slip Yoke and U-joints

1963-1970 Corvette C2 & C3 1310 series Driveshaft 2 inch tube diameter complete with U-Bolt style detachable 27 spline transmission slip yoke and Spicer 1310 series maintenance free u-joints.  No greasy mess splattered all over that nice Corvette from these u-joints and you can expect very high mileage with no maintenance. All Denny’s Corvette Driveshafts are high speed balanced and tested to be sure they will run smooth throughout your full rpm and driving range. Completely assembled for easy installation.   

Please measure from front u-joint center to rear u-joint center to order

$345.95 Complete Driveshaft

Includes Slip Yoke and U-joints

1968-1979 Corvette C3 1330 series Driveshaft 2.5 inch tube diameter complete with Strap & Bolt style detachable 32 spline transmission slip yoke and Spicer 1330 series maintenance free u-joints. No greasy mess splattered all over that nice Corvette from these u-joints and you can expect very high mileage with no maintenance. All Denny’s Corvette Driveshafts are high speed balanced and tested to be sure they will run smooth throughout your full rpm and driving range. Completely assembled for easy installation   

Please measure from front u-joint center to rear u-joint center to order

$99.95

1310 Series U-Bolt Style 27 spline Corvette Transmission Slip yoke. Restoration fanatics will appreciate how exact this unit resembles the original GM Corvette slip yoke. These will have the same overall dimensions as your original yoke and most importantly for those of you who are looking for “restoration originality” they will look just like the originals. Fits all 27 spline GM manual and automatic transmissions. Comes with (2) U-bolts (4) lock washers and (4) nuts. Replace that old worn out original with a new one.

$99.95

1330 Series Strap & Bolt Style 32 spline Corvette Transmission Slip yoke. Restoration fanatics will appreciate how exact this unit resembles the original GM Corvette slip yoke. These will have the same overall dimensions as your original yoke and most importantly for those of you who are looking for “restoration originality” they will look just like the originals. Fits all 32 spline GM manual and automatic transmissions. Comes with (2) Straps and (4) Bolts. Replace that old worn out original with a new one.

$99.95

1310 Series 16 spline 1955-1962 Corvette Transmission Slip yoke.   Press in style just like the original. Replace that old worn out original with a new one.

$5.95 set

1310 Series U-Bolt Set for 1953-1979 Corvette 27 spline Transmission Slip Yoke and 1953-1962 rear end pinion yoke. U-bolt set comes with (2) U-bolts (4) lock washers and (4)nuts.  Replace that old stretched out original set with a new one.

$6.95 each set

2 Sets required per vehicle

1350 Series U-Bolt Set for 1963-1979 Corvette axle half shafts.  Super strong u-bolt set comes with (2) U-bolts (4) lock washers and (4)nuts. Replace that old stretched out original set with a new one.

Select this button to Buy 1 U-Bolt Set

Select this button to Buy 2 U-Bolt Sets

$8.95 each set

2 Sets required per vehicle

1350 Series Strap & Bolt Set for 1984-1996 C4 Corvette axle half shafts.  Strap and bolt set comes with (2) Straps (4) Bolts.  Replace that old stretched out original set with a new one.

$8.95 each set

1310 Series Strap & Bolt Set for 1980-1996 C3 C4 Corvette main driveshaft.  Strap and bolt set comes with (2) Straps (4) Bolts.  Replace that old stretched out original set with a new one.

$6.95 each set

1310 Series Strap & Bolt Set for 1963-1979 C2 C3 Corvette rear end differential pinion yoke.  Fits both 1310 and 1330 pinion yokes.  Strap and bolt set comes with (2) Straps (4) Bolts.  Replace that old stretched out original set with a new one.

$69.95

1310 Series Strap & Bolt Style 30 spline 1963-1979 Corvette Pinion yoke original equipment replacement. Restoration fanatics will appreciate how exact this unit resembles the original OEM GM Corvette Pinion yoke. U-joint size is 3 7/32 inches wide with 1 1/16th inch cap diameter. These will have the same overall dimensions as your original yoke and most importantly for those of you who are looking for “restoration originality” they will look just like the originals. Fits all 30 spline Corvette rear differentials. Comes with (2) Straps and (4) Bolts.  Replace that old worn out original with a new one.

$69.95

1330 Series Strap & Bolt Style 30 spline 1963-1979 Corvette Pinion yoke original equipment replacement. Fits all 63-79 Corvette 30 spline rear differentials but it is usually found on 1970-1979 Corvette with T-400, large output Muncie and Super T-10. U-joint size is 3 5/8 inches wide with 1 1/16th inch cap diameter. Restoration fanatics will appreciate how exact this unit resembles the original OEM GM Corvette Pinion yoke. These will have the same overall dimensions as your original yoke and most importantly for those of you who are looking for “restoration originality” they will look just like the originals. Comes with (2) Straps and (4) Bolts.  Replace that old worn out original with a new one.