7260 to 7290 series Combination Universal Joints
- To connect 7260 series driveshafts or driveline components to 7290 series driveshafts or driveline components.
- For example:
- to connect a 7260 slip yoke to a 7290 driveshaft.
- to connect a 7290 driveshaft to a 7260 rear end pinion yoke
- 7260 series
- 2.125 inches (2 1/8) wide between the yoke inner surfaces where the "C" Clips lock in. Approximate overall width cap to cap is 3 1/4 inches
- 2 bearing caps are 1.078 inch diameter
- Designed for INSIDE "C" Clip style driveshaft yokes and also NON Locating Tab style pinion yokes, transmission yokes and transfer case yokes
- 7290 series
- 2.625 inches (2 5/8) wide between the yoke inner surfaces where the "C" Clips lock in. Approximate overall width cap to cap is 3 5/8 inches
- 2 bearing caps are 1.125 inch diameter
- Designed for INSIDE "C" Clip style driveshaft yokes and also NON Locating Tab style pinion yokes, transmission yokes and transfer case yokes
CLICK on the selections below for more details
Combo Jt DODGE 7260 to 7290..2 1/8 INSIDE to 2 5/8 INSIDE1.078 x 1 1/8 Bearing Cap Diameter
|
