DE-15688 Installation Tool for use with Rubber Boot Part Number 2-86-418
|
||||||
|
||||||
DE-15688 Installation Tool Rubber Boot Installation Tool Use this handy tool when replacing the Rubber Boot on your CV Driveshaft. |
||||||
Denny's Driveshafts DE-15688 Installation Tool for rubber boot on CV Stud Yoke
|
STATUS: SOLD OUT...More Coming Soon
YOUR COST:
$32.95
|
|||||
DE-15688 Rubber Boot Installation Tool Use this handy tool when installing Rubber Boot ... Part Number: 2-86-418 ... onto your 1310, 1330 or 1350 series CV Driveshaft. It's a simple job to replace the rubber boot on the CV stud yoke when you have the proper tools but it can be a real problem if you don't. Can be used with a hydraulic press or it can be used by striking it with a mallet. In either case it makes the job simple and there is no damage done to the rubber boot during installation. TIP: Remember to look for and to remove the old metal ring from the old rubber boot. Look closely to see if it is still on the CV Stud Yoke. If it is you can easily remove it with a screw driver and a small hammer. A small tap with the hammer and the old metal ring should come right off. |
||||||
|
||||||